Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Belt Spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Spray for Belt Drives - Only suitable for industrial use.
Uses advised against
Not suitable for commercial or private use.
Manufacturers & Suppliers
MOLYDUVAL GmbH
manufacturer
Halskestr.6, 40880 Ratingen, Germany
+49 (2102) 9757-00
Emergency Contacts
Emergency Contact
+49 (2102) 9757-20
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove exposed person to fresh air.
Remove contaminated clothing immadiately. Clean urgently with water and soap in case of skin contact. Contact Medicibe in case of irritations.
Long lasting rinse Rinse opened with water, if necessary, use eye wash. If symptoms persist, seek medical advice.
Rinse mouth and drink plenty of water. Do not induce vomiting. If symptoms persist, seek medical advice.
Immediate Medical Attention
If symptoms persist, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Dry powder. Carbon dioxide (CO2).
Strong water jet.
In case of a fire, there amy arise poisonous (CO, CO2 and other organic gases) gases.
Standard procedure for chemical fires. Extinguishing measures to the surroundings.
Firefighter Protection
If necessary, use in case of fire, self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protective equipment. Avoid contact with eyes and skin.
Avoid entering into drains, water courses or soil.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Container under pressure. Do not expose to temperatures exceeding 50°C (f.e. sunlight). Do not open violently.
To be stocked cool and dry, protect from sunlight and do not expose to temperatures exceeding 50 degree C. Smoking prohibited.
Smoking prohibited.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves - oil resistant. Glove material: nitrile rubber, butyl rubber or fluoro rubber. Recommended thickness: = 0,4 mm. Penetration time of glove material Value for the permeation: Level = 480 min. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of breakthrough time is recommended.
Safety glasses
Not required, except in case of aerosol formation. Avoid inhalation of vapors. Use respiratory Personal Protective Equipment protective device against the effects of fumes / dust / aerosol. Combination filter, eg. As DIN 3181 ABEK
work clothes
Do not discharge into surface water or drains
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Danger of explosion in case of overheating
No dangerous reaction known under conditions of normal use.
No information available
no information available
no decomposition
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS FLAMMABLE
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Belt Spray?
The signal word is danger.
What is the physical form of Belt Spray?
Belt Spray is a aerosol appearing as not specified with brown color. It has without odor.
What is Belt Spray used for?
Spray for Belt Drives - Only suitable for industrial use.
What are the hazard statements for Belt Spray?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst when heated.
- H317: May cause allergic skin reaction.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness and dizziness.