NextSDS Logo
Safety Data Sheet EN

Rittal Decklack

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Rittal Decklack

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paint

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

R

RITTAL GmbH & Co.KG

manufacturer

Auf dem Stützelberg D-35745 Herborn

+49 2772 505 0

Emergency Contacts

Informationszentrale gegen Vergiftungen Bonn

0228/19240

Informationszentrale gegen Vergiftungen Bonn

0228/287-3-3480

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
STOT RE Cat. 2 H373
Aquatic Chronic Cat. 2 H411
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation. May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C9, aromatics EC: 918-668-5 64742-95-6 25 - 50% Yes
Xylene EC: 215-535-7 1330-20-7 10 - 20% Yes
Ethylbenzene EC: 202-849-4 100-41-4 2.5 - 10% Yes
2-Methoxy-1-methylethyl acetate EC: 203-603-9 108-65-6 2.5 - 10% Yes
2-Butoxyethyl acetate EC: 203-933-3 112-07-2 1 - 2.5% Yes
Reaction mass ofpentamethyl-piperidyl sebacate EC: 915-687-0 --- 0.25 - 1% Yes
Toluene EC: 203-625-9 108-88-3 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin contact

Immediately rinse with water.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

If symptoms persist consult doctor.

Immediate Medical Attention

If symptoms persist, consult a doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Unsuitable media

Water with full jet

Specific hazards

During heating or in case of fire poisonous gases are produced.

Firefighter Protection

Mouth respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.

Environmental

Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.

Storage

Keep container tightly sealed.

Fire prevention

Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Keep respiratory protective device available.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Fluid
Colour
According to product specification
Colour Intensity
---
Form
Fluid
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
Undetermined.
Boiling Point
137-143 °C (1330-20-7 Xylene)
Flash Point
24 °C (DIN EN ISO 1523:2002)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
6.7-8.2 hPa
Vapor Density
---
Relative Density
Not determined.
Bulk Density
---
Density
1.037 g/cm³ (DIN EN ISO 2811-1)
Flammability
Flammable.
Upper Explosive Limit
7.5 Vol %
Lower Explosive Limit
0.7 Vol %
Explosive Limits
---
Auto Ignition Temperature
450 °C (DIN 51794)
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not miscible or difficult to mix.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
160-180 s (DIN 53211/4)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

Carbon monoxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
ADR

Warning: Flammable liquids.

IMDG

Warning: Flammable liquids.

IATA

Warning: Flammable liquids.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Rittal Decklack?

The signal word is warning.

What is the physical form of Rittal Decklack?

Rittal Decklack is a fluid appearing as fluid with according to product specification color. It has characteristic odor.

What is Rittal Decklack used for?

Paint

What are the hazard statements for Rittal Decklack?

This substance has 7 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation. May cause drowsiness or dizziness.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of Rittal Decklack?

The melting point is Undetermined. and the boiling point is 137-143 °C (1330-20-7 Xylene).