Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOUSSEX S 9092
- Product Code
- M6-14675
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- XKAW-FRY8-310J-FMJN
Identified Uses
Antifoaming agent.
Manufacturers & Suppliers
SYNTHRON
manufacturer
6 rue Barbès, 92532 LEVALLOIS PERRET, CS80050, FRANCE
(33).01.41.34.14.00
Emergency Contacts
ORFILA
(33)-01-45-42-59-59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Organo-silicons-based formulation.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyethoxylated aliphatic alcohol | 69011-36-5 | 1 - 2% | Yes |
| Amorphous silicon dioxide EC: 231-545-4 | 7631-86-9 | 1 - 2% | No |
| Decamethylcyclopentasiloxane EC: 208-764-9 | 541-02-6 | 115% | No |
| Dodecamethylcyclohexasiloxane EC: 208-762-8 | 540-97-6 | 115% | No |
| 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one EC: 220-120-9 | 2634-33-5 | 62% | Yes |
| 2-Methyl-2H-isothiazol-3-one EC: 220-239-6 | 2682-20-4 | 62% | Yes |
| Octamethylcyclotetrasiloxane; [D4] EC: 209-136-7 | 556-67-2 | 45% | Yes |
| Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one EC: 911-418-6 | 55965-84-9 | 12% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures are necessary.
Wash immediately with: Water.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Eye Irritation
Rinse mouth thoroughly with water.
Immediate Medical Attention
In case of skin reactions, consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet. Dry extinguishing powder. Foam.
Strong water jet.
Hazardous combustion products: Carbon dioxide (CO2). Carbon monoxide (CO). Silicium dioxide (SiO2). Formaldehyde.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Special danger of slipping by leaking/spilling product.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Absorb with liquid-binding material ( e.g. sand, diatomaceous earth or universal binding agents). Collect in closed and suitable containers for disposal. Wash with plenty of water.
Materials: liquid-binding material ( e.g. sand, diatomaceous earth or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protective measures: Skin contact. Eye contact. Personal protection equipment: see
Do not store at temperatures below: 5 °C.
When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work. Used working clothes should not be worn outside the work area.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See chapter 7. No additional measures necessary.
Chemical resistant protective gloves (DIN EN 374). The product Suitable material: Butyl caoutchouc (butyl rubber) By long-term hand contact. Suitable material: NBR (nitrile rubber) By long-term hand contact. Suitable material: PVC (polyvinyl chloride) By long-term hand contact.
Goggles (DIN 166).
Usually no respiratory personal protective equipment is required.
Wearing of fully sealed work clothing is recommended. Suitable protective clothing: Chemical protection clothing (DIN EN 943-1). Chemical resistant safety shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reaction when stored and handled according to instruction.
Decompostion takes place from temperatures above: 150 °C
Strong oxidising agents, Strong acid, Strong alkali.
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOUSSEX S 9092?
The signal word is warning.
What is the physical form of MOUSSEX S 9092?
MOUSSEX S 9092 is a emulsion. with white. color. It has slight odor. odor.
What is MOUSSEX S 9092 used for?
Antifoaming agent.
What are the hazard statements for MOUSSEX S 9092?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
What is the melting point of MOUSSEX S 9092?
The melting point is No data available. and the boiling point is ca.100 °C.