Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LITHOPONE 30 %
- Product Code
- DS, L, E
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- The product is a mixture
Identified Uses
White pigment for paints, coating and paper, white pigment for plastics
Manufacturers & Suppliers
Sachtleben Chemie GmbH
manufacturer
Dr.-Rudolf-Sachtleben-Str. 4 D-47198 Duisburg, Germany
+49 2066 22-0
Emergency Contacts
Giftnotruf Berlin
+49 30 30686 790
DE, EN
CHEMTEL
+1 800 255 3924
Poison Information Center
+358 9 471 977
Poison Information Center
+358 9 4711
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Give symptomatic treatment as necessary.
Wash with soap and water.
Wash with water or neutral eyewash solution.
Do not induce vomiting. Give up to 200 ml water.
Immediate Medical Attention
In case of persistent symptoms, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In adaption to materials stored in the immediate neighbourhood.
Non combustible. Ambient fire may liberate hazardous vapours.
Firefighter Protection
Do not stay in dangerous zone without self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid generation of dusts; do not inhale dusts.
Avoid dust dispersion to the environment. Dust may cause the surroundings to become white.
Use any suitable mechanical means (e.g. vacuum, sweeping)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation during handling. In case of insufficient ventilation, wear suitable respiratory equipment.
Store in original containers in a dry and cool area.
The product is not flammable
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Maintain exposures below applicable exposure limits:
Prolonged exposure should be avoided by wearing suitable protective gloves and clothing: In full contact: nitrile rubber - 0.11mm In splash contact:nitrile rubber - 0.11 mm
The use of an approved dustproof goggles is recommended if the dust concentration is likely to exceed the Occupational exposure limit
A respirator must be used if the dust concentration is likely to exceed the Occupational exposure limit. At higher concentrations wear particle filter DIN EN 143 - P2. or equivalent approved by NIOSH.
Barium Sulfates and Zinc Sulfates are not irritant but as with all fine powders can absorb moisture and natural oils from the surface of the skin during prolonged exposure. Prolonged exposure should be avoided by wearing suitable protective gloves and clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal use conditions
Reacts with acids under formation of Hydrogen Sulfide
Reaction with acids.
Temperatures > 800 °C, low pH
Acids
Hydrogen Sulfide, Sulphur Oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LITHOPONE 30 %?
The signal word is no signal word.
What is the physical form of LITHOPONE 30 %?
LITHOPONE 30 % is a powder with white color.
What is the solubility of LITHOPONE 30 %?
< 0.01 g/l
What is LITHOPONE 30 % used for?
White pigment for paints, coating and paper, white pigment for plastics
What is the melting point of LITHOPONE 30 %?
The melting point is ZnS > 800°C (subl.) BaSO4 > 1,350 °C and the boiling point is not applicable.