Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CURAPHEN 40-809 B60
- Product Form
- Mixture
- Product Code
- 40-809 B60
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 0JG0-G0KG-Q00T-48FX
Identified Uses
Industrial use Use of the substance/mixture : Comply with instructions for use (refer to technical sheet)
Uses advised against
No additional information available
Manufacturers & Suppliers
Bitrez Ltd
manufacturer
Bradley Hall Trading Estate, Bradley Lane, WN6 0XQ, Standish, Wigan, United Kingdom
01257 425512
http://www.bitrez.com
Emergency Contacts
Emergency Contact
+44 (0) 1257 425512
09.00-17.00 GMT
Emergency Contact
+44 (0) 1865 407333
24 hrs
Carechem24 (NCEC)
+1 202 464 2554
Carechem24 (NCEC)
+65 3165 2217
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Formaldehyde, polymer with 4,4'-(1-methylethylidene)bis[phenol], Bu ether | 70750-15-1 | 60 - 100% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 30 - 60% | Yes |
| Formaldehyde EC: 200-001-8 | 50-00-0 | 0.4% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.
Symptoms: May cause respiratory irritation.
Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.
Symptoms: Serious damage to eyes.
Rinse mouth. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Call a physician immediately (for eye contact). IF exposed or concerned: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Flammable liquid and vapour.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No open flames, no sparks, and no smoking. Only qualified personnel equipped with suitable protective equipment may intervene. Avoid breathing dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Limit quantities of product at the minimum necessary for handling and limit the number of exposed workers. Provide local exhaust or general room ventilation. Floors, walls and other surfaces in the hazard area must be cleaned regularly. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
[In case of inadequate ventilation] wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Flammable liquid and vapour.
No dangerous reactions known under normal conditions of use.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
Acids. Strong oxidizing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CURAPHEN 40-809 B60?
The signal word is danger.
What is the physical form of CURAPHEN 40-809 B60?
CURAPHEN 40-809 B60 is a liquid appearing as liquid. with amber. color. It has characteristic. odor.
What is the solubility of CURAPHEN 40-809 B60?
Not available
What is CURAPHEN 40-809 B60 used for?
Industrial use Use of the substance/mixture : Comply with instructions for use (refer to technical sheet)
What are the hazard statements for CURAPHEN 40-809 B60?
This substance has 8 hazard statements:
- H226: Flammable liquid and vapour.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H350: May cause cancer.
What is the melting point of CURAPHEN 40-809 B60?
The melting point is Not applicable and the boiling point is Not available.