EPIDIAN® 4X80

Take the injured person to fresh air, keep warm and peace. Consult a doctor if disturbing symptoms occur.

Symptoms: May cause headaches, nausea, vomiting, irritation of the respiratory tract.

Remove contaminated clothing and shoes. Wash contaminated skin thoroughly with soap and water. Seek medical advice if necessary.

Symptoms: May cause sensitization by skin contact.

Protect non-irritated eye, remove contact lenses. Rinse contaminated eyes thoroughly with water for 10-15 minutes. Avoid strong stream of water - risk of corneal damage. Apply a sterile dressing after rinsing. Seek medical advice if necessary.

Symptoms: Redness, itching, tears.

Call a doctor immediately, show the packaging or label. Do not induce vomiting. Rinse mouth with water and then drink plenty of water. Never give anything by mouth to an unconscious person.

Symptoms: Abdominal pain, nausea.

Water spray. Dry powder. Foam. Carbon dioxide.

Do not use a heavy water stream.

Flammable liquid and vapour. Vapours may form explosive mixture with air. Vapors are heavier than air, they can travel long distances and accumulate under the ground; may pose a risk of ignition and returning the flame to the source of the leak.

Ventilate spillage area. No open flames, no sparks, and no smoking. Do not breathe spray, vapours. Avoid contact with skin and eyes.

Avoid the formation of vapors. In case of spillage, steps should be taken to prevent it from spreading into the environment - prevent it from reaching sewage systems, water reservoirs, rivers, groundwater and soil.

Take up liquid spill into absorbent material.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground, bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Avoid contact with skin and eyes.

Store in original container. Store in a dry place. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.

Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground, bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Ensure adequate ventilation in confined areas. If ventilation is not sufficient, to keep vapour concentrations below the limit valuesuse the appropriate respiratory protection. Personal protection equipment should be selected on the basis of substance concentrations at individual work stations, exposure time, operator functions and recommendations indicated by the supplier of the equipment. In explosion-risk areas, wear clothes, gloves and boots with electrostatic discharge protection function. Procedures for monitoring concentrations of hazardous components in the air and procedures for air cleanliness in the workplace should be applied - as long as they are available and justified at the workplace - in accordance with the relevant reference methods - standards in force in Poland. The mode, type and frequency of tests and measurements should meet the requirements of the Regulation of the Minister of Health of February 2, 2011 on tests and measurements of factors harmful to health in the work environment (Journal of Laws No. 33 item 166, as amended). Ensure good ventilation of the work station.

Protective gloves. Type: Protective gloves, Material: Butyl rubber, Permeation: 6 (> 480 minutes), Thickness: > 0,4 mm, Penetration: 3 (> 0.65), Standard: EN ISO 374

Safety glasses. Type: Face shield, Safety goggles, Field of application: Droplet, Characteristics: clear, Standard: EN 166

In case of insufficient ventilation, wear suitable respiratory equipment. Device: Full face mask, Filter type: ABEK, Condition: If conc. in air > exposure limit, Vapour protection, Protection for Liquid particles, Standard: EN 143, EN 149. Device: Reusable half mask, Filter type: Type P2, Condition: Vapour protection, Short term exposure, Protection for Liquid particles, Standard: EN 143, EN 149

Wear suitable protective clothing. Other skin protection Materials for protective clothing: Use protective clothing. Safety foot-wear. Condition: Indoor or outdoor use, Material: antistatic boots, Antistatic clothing, Standard: EN 340, EN 14605, EN ISO 20346

Avoid release to the environment.

Stable under normal conditions of use.

The product reacts with amines, hardening amides, strong mineral acids, bases and strong oxidizing agents. Flammable liquid and vapour.

They do not occur in accordance with the intended use and conditions of use and during storage in the recommended conditions. Curing with Lewis acid / base hardeners can be very violent with release of heat.

Protect from sunlight. Protect from moisture. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.

Lewis acid / base hardeners

Under normal conditions of storage and use, hazardous decomposition products should not be produced.