Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DAPROÒFK 321
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 0391-X0QW-X001-KCNV
Identified Uses
Reducing agent
Manufacturers & Suppliers
Elementis UK Ltd.
manufacturer
c/o Elementis GmbH, Stolberger Str. 370, 50933 Cologne, Germany
+49 (0) 221 2923 2000
Elementis
manufacturer
469 Old Trenton Road, East Windsor, NJ 08512, USA
+1-609-443-2000
Emergency Contacts
CHEMTREC
+44 20 3807 3798
CHEMTREC
+1-703-527-3887
Elementis (USA)
+1-609-443-2000
Elementis (EU)
+49 (0) 221 2923 2000
Europe
112
National Poisons Information Service (NPIS)
+44 (0)344 892 0111
Poisons Information Centre of Ireland
+353 (0)1 809 2166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS06
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quaternary ammonium compounds, coco alkylethyldimethyl, ethyl sulfates EC: 939-607-9 | --- | 50 - 100% | Yes |
| Isobutyl alcohol EC: 201-148-0 | 78-83-1 | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, give oxygen. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Difficulty in breathing, dizziness, drowsiness, headache.
Wash off immediately with soap and plenty of water.
Symptoms: Redness, swelling of tissue.
Rinse immediately carefully and thoroughly with eye-bath or water.
Symptoms: Risk of serious damage to eyes, redness, swelling of tissue.
Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. If swallowed, seek medical advice immediately and show this SDS or label.
Immediate Medical Attention
Get medical attention immediately if symptoms occur. If swallowed, seek medical advice immediately and show this SDS or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2) Dry powder Dry sand Alcohol-resistant foam
Do not use a solid water stream as it may scatter and spread fire
None in particular. May emit toxic fumes under fire conditions
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material and dispose of as hazardous waste. Sweep up and shovel into suitable containers for disposal. Clean contaminated surface thoroughly.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharges. Remove all sources of ignition. Avoid contact with skin, eyes and clothing. Avoid breathing mists, dusts, or vapors. Wash hands thoroughly after handling.
Keep containers tightly closed in a cool, well-ventilated place.
Wash hands thoroughly after handling.
Take precautionary measures against static discharges. Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Maintain adequate engineering controls and/or ventilation to keep hazardous ingredients below their statutory limits.
Protective gloves, Neoprene gloves. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
Tightly fitting safety goggles (EN166). Wear face-shield and protective suit for abnormal processing problems.
Use an approved respirator whenever exposure limits are exceeded. In case of insufficient ventilation wear suitable respiratory equipment.
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions
No dangerous reaction known under conditions of normal use
None known.
Heat, flames and sparks
Oxidising agent
None reasonably foreseeable
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2924
- Shipping Name
- Flammable liquid, corrosive, n.o.s (Isobutanol, Quaternary ammonium compound)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DAPROÒFK 321?
The signal word is danger.
What is the physical form of DAPROÒFK 321?
DAPROÒFK 321 is a liquid appearing as clear liquid with colourless color. It has alcoholic odor.
What is DAPROÒFK 321 used for?
Reducing agent
What are the hazard statements for DAPROÒFK 321?
This substance has 7 hazard statements:
- H226: Flammable liquid and vapour
- H302: Harmful if swallowed
- H311: Toxic in contact with skin
- H314: Causes severe skin burns and eye damage
- H335: May cause respiratory irritation
- H336: May cause drowsiness or dizziness
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of DAPROÒFK 321?
The melting point is ~ - 15 °C (DGF-C-IV-3A) and the boiling point is 108 (°C).