DOMOPOL 5132 60 SAB/MPA ND

If there are any symptoms transfer the victim to clean air.

Remove contaminated clothing. Wash skin with soap and water. Do not use organic solvents or thinners.

Symptoms: Prolonged exposure (contact) with the product causes loss of fat in the skin which can cause inflammation of the skin.

Flush eyes with water to remove product residue.

Symptoms: Redness, tearing and irritation at sensitive persons.

Do not eat. Rinse mouth with water. Do not induce vomiting.

Symptoms: In the case of large ingested amounts of product, sensitive individuals may experience nausea, vomiting and diarrhea.

Foam, powder, carbon dioxide, inert gas or INERGEN FM 200 (started phase fire fighting), water fog.

Water jet, unless USED ONLY for water mist to cool containers with flammable products. Open waterjet.

The possibility of formation man harmful gases and thick smoke during the fire.

Extinguish fire in wind direction. Cooldown vessels with product, which do not burn with dispersed water, prevent leakage of the product and place them in a safety place.

Prevent leakage into water, water dams, cellars, caves or sewage system. Prevent outflow into water, water dams, cellars, caves or sewage system and vapour accumulation in closed rooms.

Absorb the outflown product and mix it with soil, sand or other absorptive materials for liquids.

Materials: soil, sand or other absorptive materials for liquids

Do not smoke, drink or eat while handling the product. Do not breathe vapors, avoid contact with skin and eyes. At work wear cotton overalls or coveralls, nitrile rubber gloves and safety glasses with side shields.

Store in tightly closed vessels in a cool and ventilated room. Store in an upright position. DO NOT EXPOSE TO SUNLIGHT DIRECTLY.

Do not smoke, drink or eat while handling the product.

Prevent contact with hot objects, sparkles, flame and sources of ignition. During the pumping static electrification may occur. Emptying of static electrification, which could cause fire. At the decanting of larger quantities assure conductivity with binding and earthing of complete equipment. In the warehouse there should be no tools or machines, which are the source of sparkling.

Atseveral contacts with the product use gloves made of nytril rubber with thickness 0,40 mm, in contact with drops of product (minor contacts) the gloves made of nytril rubber of thickness 0,11 mm.

At the low concentrations in the air wear protective goggles, at high concentrations theprotective mask for the whole face.

When used in confined spaces, prolongedwork,wearprotective mask for the whole face with filter"A".In case that the oxygen concentration in the air of work room falls under 17 %, use independent respirator with an open circle on the compressed air.

In normal conditions wear clothes made of cotton and suitable footwear. In case the possibility of outflow is high, use the clothes and footwear resistant to chemicals(PVC,rubber).

The product is stable under conditions in accordance with the instructions and proper storage.

Stable - when used in accordance with the instructions.

The presence of open flame or hazardous materials.

Avoid contact of product with heat, sparks, flames and other ignition sources.

extreme oxidants

No data available

The product leftovers , waste and useless packaging should be handled in accordance with the Regulations on processing of special and dangerous waste (dir. 91/689/EEC, dir. 2000/532/EC).

The recommended dgradation method is the use of the controlled high temperature incineration or disposal to the deposits for dangerous substances.