Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DOMACRYL 285 55 SAB/BG
- Product Code
- 479379
Regulatory Identifiers
- CAS Number
- N/A
Emergency Contacts
HSE dept.
+386 (1) 722 4383
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Solution of acrylic resin in organic solvents.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclic, <2% aromatics EC: 265-150-3 | 64742-48-9 | 1 - 2.99% | Yes |
| Hydrocarbons,C10,aromatics, <1% of naphthalene EC: 918-811-1 | --- | 30 - 49.99% | Yes |
| 2-butoxyethanol EC: 203-905-0 | 111-76-2 | 3 - 4.99% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If there are any symptoms transfer the victim to clean air.
Symptoms: No data.
Remove contaminated clothing. Wash skin with soap and water. Do not use organic solvents or thinners.
Symptoms: Prolonged exposure (contact) with the product causes loss of fat in the skin which can cause inflammation of the skin.
Flush eyes with water to remove product residue.
Symptoms: Redness,tearingand irritation at sensitivepersons.
Do not eat. Rinse mouth with water. Do not induce vomiting.
Symptoms: In the case of large ingested amounts of product, sensitive individuals mayexperience nausea,vomitingand diarrhea.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, powder, carbon dioxide, inert gas or INERGEN FM 200 (started phase fire fighting), water fog.
Water jet, unless USED ONLY for water mist to cool containers with flammable products. Open water jet.
The product is not flammable.
Close vessels with the product.
Firefighter Protection
The use of protective mask with filterAis mandatory.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent leakage into water, water dams, cellars, caves or sewage system. Prevent outflow into water, water dams, cellars, caves or sewage system and vapour accumulation in closed rooms.
Absorb the outflown product and mix it with soil, sand or other absorptive materials for liquids.
Materials: soil, sand or other absorptive materials for liquids
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling avoid contact with eyes and skin and to prevent leakage / diffusion of product into the environment.
Store in accordance with the regulations on the storage of flammable and other dangerous substances. Keep in a tightly closed container in dry and ventilated storage, follow the instructions on the label. Packaging should be marked with an original product label. DO NOT EXPOSE TO SUNLIGHT DIRECTLY.
Do not eat or drink during the use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Atseveral contacts with the product use gloves made of nytril rubber with thickness 0,40 mm, in contact with drops of product (minor contacts) the gloves made of nytril rubber of thickness 0,11 mm.
At the low concentrations in the air wear protective goggles, at high concentrations theprotective mask for the whole face.
When used in confined spaces, prolongedwork,wearprotective mask for the whole face with filter"A".In case that the oxygen concentration in the air of work room falls under 17 %, use independent respirator with an open circle on the compressed air.
In normal conditions wear clothes made of cotton and suitable footwear. In case the possibility of outflow is high, use the clothes and footwear resistant to chemicals(PVC,rubber).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under conditions in accordance with the instructions and proper storage.
Stable - when used in accordance with the instructions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product leftovers, waste and useless packaging should be handled in accordance with the Regulations on processing of special and dangerous waste (dir. 91/689/EEC, dir. 2000/532/EC).
The product leftovers, waste and useless packaging should be handled in accordance with the Regulations on processing of special and dangerous waste (dir. 91/689/EEC, dir. 2000/532/EC).
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. solvent naphtha (petroleum), heavy aromatic
- Transport Class
- 9
- Packing Group
- III
Transport with respecting transport labels and the requests of transportation legislation.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This Safety Data Sheet has been prepared in accordance with a comprehensive chemicals legislation - REACH Regulation on chemicals and the Regulation for classification, labeling and packaging (CLP/GHS).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DOMACRYL 285 55 SAB/BG?
The signal word is warning.
What is the physical form of DOMACRYL 285 55 SAB/BG?
DOMACRYL 285 55 SAB/BG is a liquid appearing as liquid . It has specific for organic solvents odor.
What is the solubility of DOMACRYL 285 55 SAB/BG?
Insoluble
What are the hazard statements for DOMACRYL 285 55 SAB/BG?
This substance has 2 hazard statements:
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with longlastingeffects.
What is the melting point of DOMACRYL 285 55 SAB/BG?
The melting point is ;computational method,based on component data;No data and the boiling point is ; computational method, based on component data ; No data.