Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NOVAKRYL 540
- Product Form
- Mixture
- Synonyms
- Acrylic Clearcoat
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
The product is intended for professional use
Uses advised against
No additional information available
Manufacturers & Suppliers
NOVOL Sp. z o.o.
manufacturer
Žabikowska 7/9, 62-052 KOMORNIKI, Poland
0048618109800
http://www.novol.com
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 20 - 25% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 10 - 15% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 5 - 10% | Yes |
| isobutyl methyl ketone EC: 203-550-1 | 108-10-1 | 4 - 7% | Yes |
| 2-butoxyethyl acetate; butylglycol acetate EC: 203-933-3 | 112-07-2 | 2 - 3% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 2 - 3% | Yes |
| methyl methacrylate; methyl 2-methylprop-2-enoate; methyl 2-methylpropenoate EC: 201-297-1 | 80-62-6 | 1% | Yes |
| α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) | 104810-48-2 | 0.4% | Yes |
| Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate EC: 255-437-1 | 41556-26-7 | 0.3% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 0.3% | Yes |
| α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) | 104810-47-1 | 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Vapours may cause drowsiness and dizziness.
After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. If skin irritation continues, consult a doctor.
Symptoms: Prolonged or repeated contact may cause skin to become dry.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Symptoms: May cause eye irritation.
If swallowed: rinse mouth. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, CO2, alcohol-resistant foam or waterspray.
Do not use a heavy water stream.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove ignition sources. Ensure that there is a suitable ventilation system. Avoid any direct or indirect contact with ingredients released. Avoid contact with skin and eyes. Use personal protective equipment as required.
Avoid release to the environment.
Mechanically recover the product.
Materials: non combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment.
Store in a well-ventilated place. Keep cool. Keep container tightly closed.
Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Disposable gloves, Material: Viton® II, Permeation: 6 (> 480 minutes), Thickness: 0,7 mm, Standard: EN 374-3. Disposable gloves, Material: Nitrile rubber (NBR), Permeation: 2 (> 30 minutes), Thickness: 0,4 mm, Standard: EN 374-3.
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment. Gas mask with filter type, Filter type: Filter A1/B1, Standard: EN 14387.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
Keep away from sources of ignition. Prevent build-up of electrostatic charges (e.g., by grounding). Protect from sunlight. Avoid high temperatures.
strong acids, strong bases and strong oxidants.
Under normal conditions of storage and use, hazardous decomposition products should not be produced. Thermal decomposition may produce : Carbon monoxide. Other toxic gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is NOVAKRYL 540 known by?
NOVAKRYL 540 is also known as: Acrylic Clearcoat
What is the hazard signal word for NOVAKRYL 540?
The signal word is danger.
What is the physical form of NOVAKRYL 540?
NOVAKRYL 540 is a liquid with colourless. color. It has characteristic. odor.
What is the solubility of NOVAKRYL 540?
Slightly soluble.
What is NOVAKRYL 540 used for?
The product is intended for professional use
What are the hazard statements for NOVAKRYL 540?
This substance has 6 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of NOVAKRYL 540?
The melting point is Not applicable and the boiling point is 120 – 130 °C.