NextSDS Logo
Safety Data Sheet EN

ALKANES, C14-17 CHLORO

CAS 85535-85-9
EC 287-477-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ALKANES, C14-17 CHLORO
Product Code
47946
Chemical Name
ALKANES, C14-17 CHLORO
Synonyms
HORDALUB 80 EM, HORDAFLEX SP

Regulatory Identifiers

CAS Number
85535-85-9 Check regulations →
EC Number
287-477-0 Check regulations →
REACH No.
01-2119519269-33-XXXX

Identified Uses

Industrial use. Lubricant. Additive Chemical Intermediate Production of Rubber Sealant. Adhesive. Metalworking fluid. Flame retardant Textiles Additive for paint.

Manufacturers & Suppliers

U

Univar Solutions UK Ltd

national supplier

Aquarius House, 6 Mid Point Business Park, Bradford, BD3 7AY

+44 1274 267300

Emergency Contacts

SGS

+32 (0)3 575 55 55

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Not Classified
Lact. H362
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS09 - Environmental hazard

GHS09

Hazard Statements

H362 May cause harm to breast-fed children.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P263 Avoid contact during pregnancy and while nursing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P501 Dispose of contents/ container in accordance with national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
ALKANES, C14-17 CHLORO EC: 287-477-0 85535-85-9 --- No

Notes

The data shown are in accordance with the latest EC Directives.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Rinse nose and mouth with water. Get medical attention if any discomfort continues.

Skin contact

After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. Get medical attention if any discomfort continues.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Eye contact

Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention immediately. Continue to rinse.

Ingestion

Rinse mouth thoroughly with water. Do not induce vomiting. Get medical attention if any discomfort continues.

Immediate Medical Attention

If in doubt, get medical attention promptly.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

When heated and in case of fire, toxic vapours/gases may be formed.

Instructions

No action shall be taken without appropriate training or involving any personal risk. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.

Firefighter Protection

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Provide adequate ventilation. Wear protective clothing as described in Section 8 of this safety data sheet. Follow precautions for safe handling described in this safety data sheet. Avoid inhalation of vapours and contact with skin and eyes.

Environmental

Very toxic to aquatic life with long lasting effects. Do not discharge into drains or watercourses or onto the ground.

Cleanup methods

Absorb spillage with inert, damp, non-combustible material. Collect and place in suitable waste disposal containers and seal securely. Label the containers containing waste and contaminated materials and remove from the area as soon as possible.

Materials: inert, damp, non-combustible material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation. Wear protective clothing as described in Section 8 of this safety data sheet. Follow precautions for safe handling described in this safety data sheet. Avoid inhalation of vapours and contact with skin and eyes. Obtain special instructions before use. Avoid contact during pregnancy/while nursing.

Storage

Store in tightly-closed, original container in a dry, cool and well-ventilated place.

Hygiene

Do not eat, drink or smoke when using this product. Wash skin thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Use process enclosures, local exhaust ventilation or other controls engineering controls as the primary means to minimise worker exposure.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. To protect hands from chemicals, gloves should comply with European Standard EN374.

Eyes

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Chemical splash goggles. Personal protective equipment for eye and face protection should comply with European Standard EN166.

Respiratory

Respiratory protection complying with an approved standard should be worn if a risk assessment indicates inhalation of contaminants is possible. Ensure all respiratory protective equipment is suitable for its intended use and is ‘CE’-marked. If ventilation is inadequate, suitable respiratory protection must be worn. EN 136/140/141/145/143/149

Skin/Body

Wear appropriate clothing to prevent repeated or prolonged skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
No information available.
Relative Evaporation Rate
---
Solubility In Fat
---
Cloud Point
---
Odor
Odourless.
Appearance
Liquid.
Lower Explosive Limit
No information available.
Voc Content
No information available.
Vapor Pressure
No information available.
Kinematic Viscosity
---
Molecular Weight
No information available.
Relative Density
1.28 - 1.32 @ 60°C
Colour Intensity
---
Colour
Yellow.
Evaporation Rate
No information available.
Density
---
Properties Status
---
Boiling Point
No information available.
Flammability
No information available.
Physical State Data
liquid
Dynamic Viscosity
~ 4510 mPa s @ 30°C
Explosive Limits
---
Upper Explosive Limit
No information available.
Flash Point
> 200°C
Freezing Point
= -6°C
Metal Corrosion
---
Odor Threshold
No information available.
Bulk Density
No information available.
Auto Ignition Temperature
No information available.
Solubility
No information available.
Partition Coefficient
No information available.
State Under Standard Conditions
---
Melting Point
Not applicable.
Ph
No information available.
Solubility In Water
---
Softening Point
---
Form
---
Crystallisation Point
---
Decomposition Temperature
No information available.
Solidification Point
---
Physical State
Liquid.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

Under normal conditions of storage and use, no hazardous reactions will occur.

Avoid

Avoid excessive heat for prolonged periods of time.

Incompatible

Strong oxidising agents.

Decomposition

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours. Oxides of the following substances: Carbon.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (ALKANES, C14-17 CHLORO)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is ALKANES, C14-17 CHLORO known by?

ALKANES, C14-17 CHLORO is also known as: HORDALUB 80 EM, HORDAFLEX SP

What is the hazard signal word for ALKANES, C14-17 CHLORO?

The signal word is warning.

What is the physical form of ALKANES, C14-17 CHLORO?

ALKANES, C14-17 CHLORO is a liquid. appearing as liquid. with yellow. color. It has odourless. odor.

What is the solubility of ALKANES, C14-17 CHLORO?

No information available.

What is ALKANES, C14-17 CHLORO used for?

Industrial use. Lubricant. Additive Chemical Intermediate Production of Rubber Sealant. Adhesive. Metalworking fluid. Flame retardant Textiles Additive for paint.

What are the hazard statements for ALKANES, C14-17 CHLORO?

This substance has 2 hazard statements:

  • H362: May cause harm to breast-fed children.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of ALKANES, C14-17 CHLORO?

The melting point is Not applicable. and the boiling point is No information available..