Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Borchi® Gen LMW
- Product Code
- 000000003000246543
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Intermediate
Uses advised against
Not listed on TSCA
Manufacturers & Suppliers
Borchers GmbH
manufacturer
Berghausener Straße 100 40764 Langenfeld
+1-864-503-1940
Emergency Contacts
Europe
+44 1235 239670
Middle East/Africa
+44 1235 239671
Americas
+1 215 207 0061
East/South East Asia
+65 3158 1074
Global/English speaking
+44 1865 407333
CHEMTREC US
1-800-424-9300
CHEMTREC WORLD
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl-4-phenylphenol polyglycol ether | 104376-72-9 | 90 - 100% | No |
| dibenzyl ether EC: 203-118-2 | 103-50-4 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If on skin, rinse well with water.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local cir- cumstances and the surrounding environment.
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapors/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitization problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully re- sealed and kept upright to prevent leakage.
Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Impervious gloves. Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water Tightly fitting safety goggles
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No data available
Not applicable
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Borchi® Gen LMW?
The signal word is no signal word.
What is the physical form of Borchi® Gen LMW?
Borchi® Gen LMW is a liquid with light yellow color. It has no data available odor.
What is Borchi® Gen LMW used for?
Intermediate
What are the hazard statements for Borchi® Gen LMW?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Borchi® Gen LMW?
The melting point is No data available and the boiling point is 185 ℃.