Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3,3-Diaminobenzidine Tetrahydrochloride Hydrate
- Product Code
- A0198135
- Chemical Name
- 3,3-Diaminobenzidine Tetrahydrochloride Hydrate
Regulatory Identifiers
- CAS Number
- 868272-85-9 Check regulations →
Identified Uses
General use
Manufacturers & Suppliers
Chemos GmbH & Co. KG
manufacturer
Sonnenring 7 84032 Altdorf Germany
+49 871-966346-0
http://www.chemos.de/
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3,3-Diaminobenzidine Tetrahydrochloride Hydrate | 868272-85-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Brush off loose particles from skin. Rinse skin with water/shower.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, ABC-powder
Water jet
Deposited combustible dust has considerable explosion potential.
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically
Related Products
Similar products with comparable safety profiles
3,3'-Diaminobenzidine Tetrahydrochloride
CAS: 7411-49-6 (anhydrous)
3,3'-Diaminobenzidine Tetrahydrochloride Hydrate [for Biochemical Research]
CAS: 868272-85-9
3,3'-Diaminobenzidine
CAS: 91-95-2
3,3'-Dichlorobenzidine
CAS: 91-94-1
3,3'-Diaminobenzidine (DAB) Liquid Substrate System tetrahydrochloride
---
Benzidine
CAS: 92-87-5
N,N'-Diacetylbenzidine
CAS: 613-35-4
N,N-Dimethyl-1,4-phenylenediamine Dihydrochloride [for Biochemical Research]
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Take precautionary measures against static discharge. Use only in well-ventilated areas. Ground/bond container and receiving equipment.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Take precautionary measures against static discharge. Ground/bond container and receiving equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear protective gloves.
Wear eye/face protection.
Particulate filter device (EN 143).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided. Hints to prevent fire or explosion: The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion.
Oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3,3-Diaminobenzidine Tetrahydrochloride Hydrate?
The signal word is danger.
What is the physical form of 3,3-Diaminobenzidine Tetrahydrochloride Hydrate?
3,3-Diaminobenzidine Tetrahydrochloride Hydrate is a solid (powder, crystalline) with brown - pink color. It has characteristic odor.
What is the solubility of 3,3-Diaminobenzidine Tetrahydrochloride Hydrate?
not determined
What is 3,3-Diaminobenzidine Tetrahydrochloride Hydrate used for?
General use
What are the hazard statements for 3,3-Diaminobenzidine Tetrahydrochloride Hydrate?
This substance has 2 hazard statements:
- H341: Suspected of causing genetic defects.
- H350: May cause cancer.
What is the melting point of 3,3-Diaminobenzidine Tetrahydrochloride Hydrate?
The melting point is 300 °C and the boiling point is not determined.