NextSDS Logo
Safety Data Sheet EN

Paraffin oil Ph.Eur., low viscosity

CAS 8042-47-5
EC 232-455-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Paraffin oil Ph.Eur., low viscosity
Product Code
9190
Chemical Name
Paraffin oil

Regulatory Identifiers

CAS Number
8042-47-5 Check regulations →
EC Number
232-455-8 Check regulations →
REACH No.
01-2119487078-27-xxxx

Identified Uses

Laboratory chemical Laboratory and analytical use

Uses advised against

Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feedingstuffs.

Manufacturers & Suppliers

Carl Roth GmbH + Co. KG logo

Carl Roth GmbH + Co. KG

manufacturer

Schoemperlenstr. 3-5 D-76185 Karlsruhe Germany

+49 (0) 721 - 56 06 0

https://www.carlroth.de

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways

Precautionary Statements

P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor
P331 Do NOT induce vomiting

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Paraffin oil EC: 232-455-8 8042-47-5 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air.

Skin contact

Wash with plenty of soap and water.

Eye contact

Rinse cautiously with water for several minutes.

Ingestion

Call a physician immediately. Observe aspiration hazard if vomiting occurs.

Symptoms: Gastrointestinal complaints, Diarrhoea

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. Call a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water spray, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

Unsuitable media

water jet

Specific hazards

Combustible. Vapours may form explosive mixtures with air.

Instructions

Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Special danger of slipping by leaking/spilling product. Do not breathe vapour/spray.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provision of sufficient ventilation.

Storage

Keep container tightly closed.

Hygiene

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,11 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).

Eyes

Use safety goggle with side protection.

Respiratory

Respiratory protection necessary at: Aerosol or mist formation. Type: A-P2 (combined filters against particles and organic gases and vapours, colour code: Brown/White). Usually no personal respirative protection necessary.

Skin/Body

Preventive skin protection (barrier creams/ointments) is recommended.

Environmental

Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
---
Odor
odourless
Odor Threshold
---
Ph
not determined
Melting Point
-60 – -9 °C at 101,3 kPa (ECHA)
Boiling Point
218 – 800 °C at 101,3 kPa (ECHA)
Flash Point
>112 °C at 101,3 kPa (ECHA)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
≤0,01 kPa at 20 °C
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0,81 – 0,875[g] /cm³ at 20 °C
Flammability
this material is combustible, but will not ignite readily
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
≥325 – ≤355 °C at 101,3 kPa (ECHA)
Decomposition Temperature
>350 °C
Solubility
---
Partition Coefficient
this information is not available
Solubility In Water
insoluble (< 1 mg/l)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
25 – 80 mPa s at 20 °C
Kinematic Viscosity
91,43[mm²] /s at 20 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

This material is not reactive under normal ambient conditions.

Hazardous reactions

Violent reaction with: strong oxidiser, Chlorates, Perchlorates, Peroxides, Nitrate, => Explosive properties

Avoid

If heated

Incompatible

There is no additional information.

Decomposition

Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Paraffin oil Ph.Eur., low viscosity?

The signal word is danger.

What is the physical form of Paraffin oil Ph.Eur., low viscosity?

Paraffin oil Ph.Eur., low viscosity is a liquid with colourless color. It has odourless odor.

What is Paraffin oil Ph.Eur., low viscosity used for?

Laboratory chemical Laboratory and analytical use

What are the hazard statements for Paraffin oil Ph.Eur., low viscosity?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways

What is the melting point of Paraffin oil Ph.Eur., low viscosity?

The melting point is -60 – -9 °C at 101,3 kPa (ECHA) and the boiling point is 218 – 800 °C at 101,3 kPa (ECHA).