Ethylene glycol

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse mouth with water (only if the person is conscious). Call a doctor.

co-ordinate firefighting measures to the fire surroundings! water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

water jet

Combustible. Vapours are heavier than air, spread along floors and form explosive mixtures with air.

Fight fire with normal precautions from a reasonable distance.

Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).

Materials: sand, diatomaceous earth, acid- or universal binding agents

Provision of sufficient ventilation.

Keep container tightly closed. Store in a dry place. Hygroscopic.

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,3 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6)

Use safety goggle with side protection.

Respiratory protection necessary at: Aerosol or mist formation. Type: A (against organic gases and vapours with a boiling point of > 65 °C , colour code: Brown).

Preventive skin protection (barrier creams/ointments) is recommended.

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions. If heated: Vapours may form explosive mixtures with air.

Exothermic reaction with: Sulphuric acid, Alkali hydroxide (caustic alkali), Aluminium, Nitric acid, Risk of ignition: Chlorates, Permanganates, Peroxides, strong oxidiser

Protect from moisture. Keep away from heat.

aluminium, zinc

Hazardous combustion products: see section 5.