NextSDS Logo
Safety Data Sheet EN

AIRPEL 1 DS-1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AIRPEL 1 DS-1
Chemical Name
Activated Carbon

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119488894-16-0011

Identified Uses

Purification of liquids or gases through adsorption

Manufacturers & Suppliers

E

ESOTEC NV

manufacturer

Regenbeekstraat 44 8800 Roeselare BELGIUM

0032/(0)51-24.60.57

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

irritating to eyes
irritating to respiratory system
irritating to skin

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Carbon, activated 1440-44-0 --- No
Potassium Hydroxide --- --- Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

remove victim to fresh air.

Symptoms: cough or other respiratory symptoms

Skin contact

wash the affected area with soap and water.

Eye contact

treat immediately by flushing with water or proprietary eye bath solution.

Symptoms: redness, itching or a burning sensation

Ingestion

give one or two glasses of water to drink.

Symptoms: gastro-intestinal symptoms

Immediate Medical Attention

obtain medical attention if symptoms develop.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water preferable. Avoid methods which create dust

Unsuitable media

None known.

Specific hazards

Airborne dust is a weak explosion hazard.

Firefighter Protection

Self contained breathing apparatus may be required

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In the event of spillage, sweep/vacuum up and recover or dispose of spillage in a facility for controlled waste. Wash down spill area with water containing detergent and flush away with plenty of water.

Cleanup methods

sweep/vacuum up and recover or dispose of spillage in a facility for controlled waste. Wash down spill area with water containing detergent and flush away with plenty of water.

Materials: water containing detergent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear adequate clean workwear and gloves.

Storage

Store indoors in a cool, dry well-ventilated location. Storage and use areas should be No Smoking areas. Protect against physical damage. Keep away from sources of ignition, strong oxidizing materials, freezing and solvent vapours.

Hygiene

Wear adequate clean workwear and gloves.

Fire prevention

Storage and use areas should be No Smoking areas. Keep away from sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation

Hands

Wear gloves.

Eyes

Under normal conditions, eye protection is not required.

Respiratory

wear dust mask type FFP2.

Skin/Body

Wear adequate clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Black, odourless solid in form of granules, extrudates or powder
Colour
Black
Colour Intensity
---
Form
granules, extrudates or powder
Odor
odourless
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
350 to 550 kg/m³
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Greater than 300°C
Decomposition Temperature
---
Solubility
Practically insoluble in water.
Partition Coefficient
---
Solubility In Water
Practically insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions

Avoid

Humidity, sources of ignition, freezing and solvent vapours.

Incompatible

Strong oxidising agents

Decomposition

Carbon dioxide, carbon monoxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AIRPEL 1 DS-1?

The signal word is na: r-phrases.

What is the physical form of AIRPEL 1 DS-1?

AIRPEL 1 DS-1 is a solid appearing as black, odourless solid in form of granules, extrudates or powder with black color. It has odourless odor.

What is the solubility of AIRPEL 1 DS-1?

Practically insoluble in water.

What is AIRPEL 1 DS-1 used for?

Purification of liquids or gases through adsorption