Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OSMO STANDARD SOLUTION
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use exclusive reagents for Automatic Osmotic Pressure Measurements (OM-6050, OM-6060).
Manufacturers & Suppliers
ARKRAY FACTORY, Inc.
manufacturer
1480 Koji, Konan-cho, Koka-shi, Shiga 520-3306, JAPAN
+81-748-86-6901
ARKRAY Europe, B. V.
Prof. J. H. Bavincklaan 2, 1183 AT Amstelveen, THE NETHERLANDS
+31-20-545-2450
Emergency Contacts
Emergency Contact
+31-20-545-2450
9:00~17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium chloride EC: 231-598-3 | 7647-14-5 | 3% | Yes |
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep at rest. If trouble breathing, get medical attention.
Immediately wash thoroughly with water and soap. Immediately get medical attention if itchiness and inflammation occurs.
Symptoms: itchiness and inflammation
Immediately wash eyes with plenty of clean water for at least 15 minutes and get medical attention.
Rinse mouth. Give one or two glasses of water to drink. Never give anything by mouth if unconscious. Immediately get medical attention.
Immediate Medical Attention
Consult a physician. Immediately get medical attention if trouble breathing, if itchiness and inflammation occurs, or after ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water
Not specified
Firefighter Protection
Fire-fighters should wear proper protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stay away from the contaminated area. For emergency responder: Wear protective equipment. See Section 8.
Flush with plenty of water or wipe off with absorbent such as damp cloth before it dries. Rinse used cloth sufficiently.
Rinse with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable protective equipment. For personal protection see Section 8.
Store at temperature of 1 - 30 °C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in a well-ventilated area.
Use rubber gloves, if necessary.
Use safety glasses, if necessary.
Not necessary
Not necessary
For environmental exposure controls, see Section 6.2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Stable under recommended storage conditions.
Sunlight
Store at a distance from incompatible materials.
Does not decompose when used for intended uses.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
When transporting, make sure that there are no leaks in the container, load it so that it does not fall over, fall, or be damaged, and make sure to prevent it from collapsing.
When transporting, make sure that there are no leaks in the container, load it so that it does not fall over, fall, or be damaged, and make sure to prevent it from collapsing.
When transporting, make sure that there are no leaks in the container, load it so that it does not fall over, fall, or be damaged, and make sure to prevent it from collapsing.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OSMO STANDARD SOLUTION?
The signal word is no signal word.
What is the physical form of OSMO STANDARD SOLUTION?
OSMO STANDARD SOLUTION is a liquid with coluorless color. It has no data available odor.
What is the solubility of OSMO STANDARD SOLUTION?
Water
What is OSMO STANDARD SOLUTION used for?
Use exclusive reagents for Automatic Osmotic Pressure Measurements (OM-6050, OM-6060).
What is the melting point of OSMO STANDARD SOLUTION?
The melting point is No data available and the boiling point is No data available.