NextSDS Logo
Safety Data Sheet EN

GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)
Product Code
PD410

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For in vitro diagnostic use. Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice.

Manufacturers & Suppliers

Randox Laboratories Ltd. logo

Randox Laboratories Ltd.

manufacturer

55 Diamond Road, Crumlin, Co. Antrim, United Kingdom, BT29 4QY

+44 (0) 28 9442 2413

www.randox.com

Emergency Contacts

Randox Laboratories Ltd.

+44 (0) 28 9442 2413

GMT, English spoken, Mon - Fri. 08.40-17.20

EN

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed
H412 Harmful to aquatic life with long lasting effects

Precautionary Statements

P264 Wash thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P273 Avoid release to the environment
P301 + P312 If swallowed: Call a doctor if you feel unwell

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium azide (Sodium azide (as NaN3)) 26628-22-8 0.1 - 0.5% Yes
Sodium azide (Sodium azide (as NaN3)) 26628-22-8 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, move victim to fresh air, rest and maintain a half-upright position. Use artificial respiration if necessary. Immediately seek medical attention.

Skin contact

If skin contact occurs, remove contaminated clothes, rinse skin with plenty of cold water or shower. Seek medical attention.

Eye contact

If eye contact occurs, first rinse with plenty of cold water for several minutes, then immediately seek medical attention.

Ingestion

If ingested, rinse mouth. Do not induce vomiting. Give plenty of water to drink. Immediately seek medical attention.

Immediate Medical Attention

Immediately seek medical attention. Call an internal person trained in First Aid if available, or contact a physician.

Medical Treatment

Call an internal person trained in First Aid if available, or contact a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

As appropriate for surrounding fire

Specific hazards

May emit toxic fumes under fire conditions.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation.

Environmental

Not determined

Cleanup methods

mop up with an absorbent material

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment (see section 8.2.2). Wash thoroughly after handling. Do not use if skin is cut or scratched. Avoid contact with eyes, skin and clothing. Do not eat, drink or smoke when using this product.

Storage

Store at temperatures and conditions as indicated on the product label.

Hygiene

Wash thoroughly after handling. Do not eat, drink or smoke when using this product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation.

Hands

Standard laboratory rubber or latex gloves

Eyes

Approved safety glasses

Skin/Body

A laboratory coat is recommended

Environmental

Not determined

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid (R1. Buffer, R4. Digitonin) Lyophilised Plug (R2. NADP, R3. Substrate)
Physical State Data
---
State Under Standard Conditions
---
Appearance
Liquid (R1. Buffer, R4. Digitonin) Lyophilised Plug (R2. NADP, R3. Substrate)
Colour
Colourless (R1. Buffer, R4. Digitonin) Clear Colourless Solution when reconstituted (R2. NADP, R3. Substrate)
Colour Intensity
---
Form
---
Odor
Odourless
Odor Threshold
Not determined
Ph
Not determined
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not determined
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
Not determined
Bulk Density
---
Density
---
Flammability
Not determined
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not determined
Solubility
Not determined
Partition Coefficient
Not determined
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions

Reactivity

Not determined

Hazardous reactions

Not determined

Avoid

Not determined

Incompatible

Not determined

Decomposition

Not determined

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)?

The signal word is warning.

What is the physical form of GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)?

GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH) is a liquid (r1. buffer, r4. digitonin) lyophilised plug (r2. nadp, r3. substrate) appearing as liquid (r1. buffer, r4. digitonin) lyophilised plug (r2. nadp, r3. substrate) with colourless (r1. buffer, r4. digitonin) clear colourless solution when reconstituted (r2. nadp, r3. substrate) color. It has odourless odor.

What is the solubility of GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)?

Not determined

What is GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH) used for?

For in vitro diagnostic use. Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice.

What are the hazard statements for GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed
  • H412: Harmful to aquatic life with long lasting effects

What is the melting point of GLUCOSE-6-PHOSPHATE DEHYDROGENASE (G-6-PDH)?

The melting point is Not determined and the boiling point is Not determined.