Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Real Time ELITe Ingenius
- Product Code
- RTSXXXPLD, RTK015PLD, RTSTXXPLD, M800XXX, RTSXXXING
- Synonyms
- Q – PCR Mix, PCR-Mix
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for in vitro diagnostics.
Uses advised against
recommended use are listed above; other uses are not recommended unless an assessment has provided that risks are controlled.
Manufacturers & Suppliers
ELITechGroup S.p.A.
manufacturer
Corso Svizzera, 185, 10149 – Torino – Italy
+39 011 97.61.91
Emergency Contacts
Emergency Contact
+39 011 97.61.91
Monday – Friday; 8:30-13; 14:00-17:30
IT
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The mixture does not contain substances hazardous to health or the environment or for which there are exposure limits national and / or EU recognized in the workplace, in accordance with Regulation (EC) No. 1272/2008, as amended and Directive 67/548/EEC and subsequent amendments.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ventilate the area or move victim to fresh air, If symptoms persist consult a doctor.
Flush with running water or eventually soap areas of the body that have come into contact, if feasible easily for 5 - 10 minutes.
Rinse immediately with plenty of water holding the eyelids open. In case of persistent irritation, consult a doctor.
Rinse mouth with water without swallowing. If pain persists see a doctor.
Immediate Medical Attention
If considered appropriate according to the above applies to, requiring medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), foam or chemicals powders depending on materials involved.
None in particular.
Avoid breathing fumes.
Firefighter Protection
Use protection for the airways, when exposed to fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Limit leakages with ground or sand.
Recover the product for disposal. Eventually absorb it with inert material. After collection, wash with water the area and materials involved.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Give adequate ventilation to the areas where the product is handled.
Use latex or vinyl gloves. Duration of the glove material: normal wear and tear.
Not necessary for normal use. Operate however according to good working practices and safety glasses with side protection.
Handle in a chemical hood if hot worked.
Not necessary for normal use. Operate however according to good working practices and laboratory coats.
Adopt good working practices, avoiding release into the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Stable at normal conditions.
No hazardous exothermic reaction, no decomposition products in contact with water, no unstable products as a result of degradation.
None in particular.
None in particular. However, it should avoid violent mixing in strong bases.
Decomposing emits fumes of COx, NH₃, HCl, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Real Time ELITe Ingenius known by?
Real Time ELITe Ingenius is also known as: Q – PCR Mix, PCR-Mix
What is the hazard signal word for Real Time ELITe Ingenius?
The signal word is no signal word.
What is the physical form of Real Time ELITe Ingenius?
Real Time ELITe Ingenius is a liquid appearing as liquid, colourless with colourless color. It has odorless odor.
What is Real Time ELITe Ingenius used for?
Product for in vitro diagnostics.
What is the melting point of Real Time ELITe Ingenius?
The melting point is N.D. and the boiling point is > 100°C at 100.000 Pa.