EVERBRITE ULTRA

If exposed to high concentrations of the vapours / mists, move to fresh air. If not breathing, give artificial respiration. Get medical attention immediately.

Symptoms: Inhalation may result in irritation or burns to the respiratory tract.

Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Get medical attention if irritation develops and persists.

Symptoms: May cause burns on prolonged or repeated exposure.

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.

Symptoms: May cause burns which could lead to permanent eye damage.

Never give anything by mouth to an unconscious person. Rinse mouth with water. Drink 1 or 2 glasses of water. Do NOT induce vomiting. If swallowed, seek medical advice immediately and show this container or label.

Symptoms: May cause gastrointestinal irritation seen as nausea, vomiting and diarrhoea.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use: Water spray. Foam. Carbon dioxide (CO2). Dry powder.

When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide, smoke and/or nitrogen oxide. Sodium oxides. Possibility of harm to the aquatic life.

Ventilate the area. Avoid contact with skin, eyes, and clothing. Use personal protective equipment. Refer to protective measures listed in sections 7 and 8. Prevent further leakage or spillage if safe to do so. Material can create slippery conditions.

Prevent further leakage or spillage if safe to do so.

Clean preferably with a detergent, do not use solvents.

Training: Due to the hazardous nature of this product, training in its use is recommended. Avoid contact with skin, eyes and clothing. Avoid breathing vapours or mists. Do not eat, drink or smoke when using this product.

Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place.

Do not eat, drink or smoke when using this product.

Ensure adequate ventilation, especially in confined areas.

Wear suitable protective gloves conforming to EN 374. Type of gloves suggested: Short term use eg occasional contact or splash protection; Nitrile rubber (0.4 mm). Long term use eg continuous wear or immersion; Solvent-resistant gloves (butyl-rubber). Fluorinated rubber. Breakthrough time of the glove material (protective index 6, breakthrough time: >480 min). Suitability and durability of a glove is dependent upon usage factors such as frequency, duration of use, temperature and chemical resistance. The use of a chemical-protective glove may in practice be much shorter than the permeation time determined through testing. For break through times, refer to glove manufacturers recommendations.

Safety glasses with side-shields. Approved to EN 166. For large volumes, faceshields should be used.

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Conforming to EN 14387 ABEK filters.

Body protection must be chosen based on activity and possible exposure, e.g. footwear (solid shoes, rubber boots), rubber apron, long-sleeved work clothing, impervious suit.

Local authorities should be advised if significant spillages cannot be contained.

Stable under normal conditions.

Not considered as highly reactive. See further information below.

The mixture itself will not dangerously react or polymerise to create hazardous conditions in normal use.

No conditions to be specially mentioned.

Strong oxidising agents. Acids.

When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide, smoke and/or nitrogen oxide. Sodium oxides.

Dispose of in accordance with local regulations. Should not be released into the environment.