Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hemoglobin F & A2 Control
- Product Form
- Mixture
- Product Code
- 0997050
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
IN VITRO DIAGNOSTIC USE ONLY
Uses advised against
No data available
Manufacturers & Suppliers
Tosoh Europe NV
national supplier
Transportstraat 4, 3980 Tessenderlo - Belgium
+32 13 66 88 30
Canterbury Scientific Ltd
manufacturer
71 Whiteleigh Avenue, Addington, 8011 Christchurch, New Zealand
+64 3 343 3345
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Take off contaminated clothing. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.
Rinse mouth thoroughly with water. Get medical advice/attention.
Symptoms: Not expected to present a significant ingestion hazard under anticipated conditions of normal use.
Immediate Medical Attention
In case of doubt or persistent symptoms, consult always a physician. Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide (CO2), powder, alcohol-resistant foam, water spray.
Strong water jet.
Not flammable. Heating causes rise in pressure with risk of bursting.
Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Wear recommended personal protective equipment. Do not breathe vapours. Avoid contact with skin, eyes and clothing. Ensure procedures and training for emergency decontamination and disposal are in place.
Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal.
Recover large spills by pumping (use an explosion proof or hand pump).
Do not allow to enter into surface water or drains.
Stop leak if safe to do so. Dam up the liquid spill. Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal. Recover large spills by pumping (use an explosion proof or hand pump). Place in a suitable container for disposal in accordance with the waste regulations (see Section 13).
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
HSV 1 & 2 Positive Control
---
HSV 1 & 2 Negative Control
---
Haemoglobin (Hb)
---
Rapid fFN Level 1 / Negative Control, Rapid fFN Level 2 / Positive Control
---
Serum Control
---
DiaMed HbF Screening Test Staining Solution
---
DiaMed HbF Screening Test Fixation Solution
---
DiaMed HbF Screening Test Elution Solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe vapours. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment.
Storage temperature 4 - 30 °C. Store in a dry, cool and well-ventilated place.
Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Organisational measures to prevent /limit releases, dispersion and exposure. Safe handling: see section 7.
Wear chemically resistant gloves (tested to EN374). The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.
Use suitable eye protection. (EN166): Safety glasses with side shields
In case of insufficient ventilation, wear suitable respiratory equipment. Half-face mask (EN 140). Full face mask (EN 136). Filter type: A (EN 141). The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. (EN 137)
Wear suitable protective clothing.
Avoid release to the environment. Comply with applicable Community environmental protection legislation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Reference to other sections: 10.4 & 10.5.
No dangerous reactions known under normal conditions of use.
Safe handling: see section 7.
Safe handling: see section 7.
Reference to other sections: 5.2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hemoglobin F & A2 Control?
The signal word is no signal word.
What is the physical form of Hemoglobin F & A2 Control?
Hemoglobin F & A2 Control is a liquid appearing as liquid. with colourless. color. It has odourless. odor.
What is the solubility of Hemoglobin F & A2 Control?
Water: completely soluble
What is Hemoglobin F & A2 Control used for?
IN VITRO DIAGNOSTIC USE ONLY
What is the melting point of Hemoglobin F & A2 Control?
The melting point is No data available and the boiling point is No data available.