NextSDS Logo
Safety Data Sheet EN

Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer
Product Code
750830
Synonyms
Enterics Sample Treatment Buffer

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For In Vitro Diagnostic use only. Component of Meridian Crypto/Giardia Rapid Assay. For use in the Meridian Crypto/Giardia Rapid Assay for the qualitative detection of Cryptosporidium parvum and Giardia lamblia specific antigens in aqueous extracts of fecal specimens.

Uses advised against

Use in accordance with supplier's recommendations.

Manufacturers & Suppliers

M

Meridian Bioscience Inc

distributor

3471 River Hills Drive, Cincinnati, OH 45244, USA

513.271.3700

Sekisui Diagnostics, LLC logo

Sekisui Diagnostics, LLC

manufacturer

4 Hartwell Place, Lexington, MA 02421, USA

+1-800-332-1042

http://www.sekisuidiagnostics.com

M

Meridian Bioscience Inc.

distributor

3471 River Hills Drive, Cincinnati, Ohio 45244

(800) 343-3858

M

Meridian Bioscience Europe

Via dell'Industria, 7, 20020 Villa Cortese, Milano

Emergency Contacts

Americas

+1-760-476-3962

Europe, Middle East & Africa

+1-760-476-3961

Asia Pacific

+1-760-476-3960

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Hazard Statements

The mixture does not meet the criteria for classification.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.

Chemical Name CAS Number Concentration Hazardous
Sodium azide EC: 247-852-1 26628-22-8 0.1% Yes

Notes

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. The full text for all H-statements is displayed in section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Call a physician if symptoms develop or persist.

Skin contact

Wash skin thoroughly with soap and water. Get medical attention if irritation develops and persists.

Eye contact

In case of contact, immediately flush eyes with fresh water for at least 15 minutes while holding the eyelids open. Remove contact lenses if worn. Get medical attention if irritation persists.

Ingestion

Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person. Get medical attention if irritation develops and persists.

Symptoms: Ingestion may cause irritation and malaise.

Medical Treatment

Provide general supportive measures and treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Extinguish with water spray, carbon dioxide, dry chemical or material appropriate for the surrounding fire.

Unsuitable media

None known.

Specific hazards

When heated to decomposition, may produce hydrazoic acid fumes.

Instructions

Use standard firefighting procedures and consider the hazards of other involved materials.

Firefighter Protection

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary personnel away. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing.

Environmental

Do not allow to enter drains, sewers or watercourses. This mixture contains a small amount of sodium azide which can react with copper, lead, brass or solder in plumbing systems and form potentially explosive metal azides. Follow proper disposal procedures.

Cleanup methods

Absorb spill with vermiculite or other inert material.

Materials: vermiculite or other inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Wash thoroughly after handling. In case of insufficient ventilation, wear suitable respiratory equipment. Handle and open container with care. Observe good industrial hygiene practices.

Storage

Store at 2-8°C (35-46°F). Store in a closed container away from incompatible materials.

Hygiene

Wash thoroughly after handling. Observe good industrial hygiene practices.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.

Hands

Wear appropriate chemical resistant gloves.

Eyes

Wear approved safety glasses or goggles.

Respiratory

In case of inadequate ventilation or risk of inhalation of vapours, use suitable respiratory equipment.

Skin/Body

Remove contaminated clothing promptly.

Environmental

Inform appropriate managerial or supervisory personnel of all environmental releases.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Odor
Not available.
Evaporation Rate
Not applicable.
Form
Liquid.
Upper Explosive Limit
Not available.
Flash Point
Not available.
Boiling Point
Not available.
Voc Content
---
Lower Explosive Limit
Not available.
Properties Status
---
Explosive Limits
---
Relative Evaporation Rate
---
Bulk Density
---
Solidification Point
---
Dynamic Viscosity
---
Odor Threshold
Not available.
Density
---
Physical State
Liquid.
Melting Point
Not available.
Molecular Weight
---
Crystallisation Point
---
Solubility In Water
---
Solubility In Fat
---
Solubility
Soluble in water.
Ph
9 Approximate.
Physical State Data
liquid
Relative Density
Not available.
Appearance
Clear, colourless liquid.
Colour
Clear, colourless.
Cloud Point
---
Partition Coefficient
Not applicable. Not applicable.
State Under Standard Conditions
---
Flammability
Not applicable.
Vapor Density
Not applicable.
Kinematic Viscosity
---
Softening Point
---
Vapor Pressure
Not available.
Metal Corrosion
---
Colour Intensity
---
Decomposition Temperature
Not available.
Auto Ignition Temperature
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable and non reactive under normal conditions of use, storage and transport.

Reactivity

The product is stable and non reactive under normal conditions of use, storage and transport.

Hazardous reactions

Contact with acids liberates toxic gas.

Avoid

Heat, sparks, flames, elevated temperatures.

Incompatible

Strong oxidising agents.

Decomposition

No data available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer known by?

Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer is also known as: Enterics Sample Treatment Buffer

What is the hazard signal word for Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer?

The signal word is no signal word.

What is the physical form of Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer?

Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer is a liquid. appearing as clear, colourless liquid. with clear, colourless. color. It has not available. odor.

What is the solubility of Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer?

Soluble in water.

What is Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer used for?

For In Vitro Diagnostic use only. Component of Meridian Crypto/Giardia Rapid Assay. For use in the Meridian Crypto/Giardia Rapid Assay for the qualitative detection of Cryptosporidium parvum and Giardia lamblia specific antigens in aqueous extracts of fecal specimens.

What are the hazard statements for Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer?

This substance has 1 hazard statement:

  • The mixture does not meet the criteria for classification.

What is the melting point of Meridian Crypto/Giardia Rapid Assay Sample Treatment Buffer?

The melting point is Not available. and the boiling point is Not available..