NextSDS Logo
Safety Data Sheet EN

OPACODE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
OPACODE
Product Form
Liquid
Product Code
S-1-17533

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Manufacture of pharmaceutical products and/or Manufacture of food products

Manufacturers & Suppliers

Colorcon logo

Colorcon

manufacturer

415 Moyer Boulevard, West Point, PA 19486 USA

+001-215-699-7733

http://www.colorcon.com

Emergency Contacts

US & Canada

+1-866-519-4752

Mexico

+52-55-41696255

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Skin Corr. Cat. 1
Eye Irrit. Cat. 2A

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

Hazard Statements

H226 Flammable liquid and vapor.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P241 Use explosion-proof electrical, ventilating or lighting equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P264 Wash thoroughly after handling.
P280 Wear protective gloves, protective clothing and eye or face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice or attention.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. Wash contaminated clothing before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
TITANIUM DIOXIDE 13463-67-7 30 - 50% No
ETHANOL 64-17-5 10 - 30% No
N-BUTYL ALCOHOL 71-36-3 5 - 10% No
ISOPROPYL ALCOHOL 67-63-0 1 - 5% No
AMMONIUM HYDROXIDE-AQUEOUS 1336-21-6 1 - 5% No
SULFURIC ACID 7664-93-9 1% No

Occupational exposure limits, if available, are listed in Section 8.

Notes

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards.

Skin contact

In case of contact, immediately flush skin with plenty of water while removing contaminated clothing and shoes. Get medical attention if irritation develops.

Symptoms: Causes severe burns.

Eye contact

Affected individual should remove contact lens, if present. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation occurs.

Symptoms: Causes serious eye irritation.

Ingestion

Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards.

Immediate Medical Attention

Get medical attention if irritation occurs (eyes), if symptoms occur (inhalation/ingestion), if irritation develops (skin), or immediately if unconscious.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary personnel away. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation. Use suitable protective equipment (section 8).

Small spill

Absorb with an inert material and place in an appropriate waste disposal container.

Large spill

Use appropriate containment to avoid environmental contamination. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Contaminated absorbent material may pose the same hazard as the spilled product. Use a non-sparking or explosion proof means to transfer material to a sealed, appropriate container for disposal.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container. Use a non-sparking or explosion proof means to transfer material to a sealed, appropriate container for disposal.

Materials: inert material, non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not ingest. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep container closed. Use only with adequate ventilation. Do not reuse container.

Storage

Keep container tightly closed. Store in a dry, cool and well-ventilated area. Store away from incompatible materials (see Section 10). Store in accordance with local regulations.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
---
Freezing Point
---
Crystallisation Point
---
Evaporation Rate
Not available.
Lower Explosive Limit
Not available.
Decomposition Temperature
Not available.
Metal Corrosion
---
Melting Point
Not available.
Auto Ignition Temperature
Not available.
Colour Intensity
---
Odor
Not available.
State Under Standard Conditions
---
Solubility In Water
---
Vapor Density
Not available.
Dynamic Viscosity
Not available.
Solidification Point
---
Upper Explosive Limit
Not available.
Solubility
Not available.
Form
---
Flash Point
Closed cup: 30.1°C (86.2°F)
Physical State
Liquid.
Ph
Not available.
Colour
Gray Liquid
Flammability
Not available.
Relative Density
Not available.
Physical State Data
liquid
Cloud Point
---
Properties Status
---
Vapor Pressure
Not available.
Bulk Density
---
Appearance
---
Voc Content
---
Relative Evaporation Rate
---
Explosive Limits
---
Odor Threshold
Not available.
Molecular Weight
---
Kinematic Viscosity
Not available.
Softening Point
---
Solubility In Fat
---
Partition Coefficient
Not available.
Boiling Point
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

Explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and heat.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition.

Incompatible

Reactive or incompatible with the following materials: oxidizing materials

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1987
Shipping Name
Alcohols, N.O. S. (Ethanol, Butanol mixture)
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for OPACODE?

The signal word is danger.

What is the physical form of OPACODE?

OPACODE is a liquid. with gray liquid color. It has not available. odor.

What is the solubility of OPACODE?

Not available.

What is OPACODE used for?

Manufacture of pharmaceutical products and/or Manufacture of food products

What are the hazard statements for OPACODE?

This substance has 2 hazard statements:

  • H226: Flammable liquid and vapor.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of OPACODE?

The melting point is Not available. and the boiling point is Not available..