Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IPAC 404
- Product Form
- Mixture
- Product Code
- 404
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants and additives
Manufacturers & Suppliers
IPAC EU Cooperatie U.A.
Hofplein 20, Suite 515 3032AC Rotterdam Netherlands
+31103100821
Emergency Contacts
CHEMTREC
+32 2 808 32 37
24hr/day 7days/week
CHEMTREC
1-800-424-9300
24hr/day 7days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenesulfonic acid, C10-16-alkyl derivs. Calcium salt EC: 271-529-4 | 68584-23-6 | 10 - 20% | Yes |
| Sulfonic acids, petroleum, calcium salts EC: 263-093-9 | 61789-86-4 | 5 - 10% | Yes |
| Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts EC: 274-263-7 | 70024-69-0 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: May cause an allergic skin reaction.
Rinse eyes with water as a precaution.
Call a poison center/doctor/physician if you feel unwell.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapors/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapors/spray. Wear personal protective equipment.
Store in a well-ventilated place. Keep cool.
Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Using chemical PPE depends upon operations conducted and may include chemical gloves, boots, chemical apron, chemical suit, and complete facial protection. Refer to PPE manufacturers to obtain breakthrough time information to determine how long PPE can be used before it needs to be replaced. Unless specific glove manufacturer data indicates otherwise, the below table is based upon available industry data to assist in the glove selection process and is intended to be used as reference only. Material: butyl rubber, Permeation: 4 (> 120 minutes), Thickness (mm): 0.7, Standard: EN ISO 374; Material: Neoprene rubber (HNBR), Permeation: 3 (> 60 minutes), Thickness (mm): 0.61, Standard: EN ISO 374; Material: Nitrile rubber (NBR), Permeation: 2 (> 30 minutes), Thickness (mm): 0.81, Standard: EN ISO 374; Material: Polyvinylchloride (PVC), Permeation: 2 (> 30 minutes), Thickness (mm): 1.1, Standard: EN ISO 374; Material: Viton® II, Permeation: 4 (> 120 minutes), Thickness (mm): 0.3, Standard: EN ISO 374.
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IPAC 404?
The signal word is warning.
What is the physical form of IPAC 404?
IPAC 404 is a liquid with amber. brown. color. It has not available odor.
What is the solubility of IPAC 404?
Not available
What is IPAC 404 used for?
Lubricants and additives
What are the hazard statements for IPAC 404?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of IPAC 404?
The melting point is Not available and the boiling point is Not available.