Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kaiflex® Spezialkleber 414 / Special Adhesive 414
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Kaimann GmbH
manufacturer
Hansastr. 2-5; D - 33161 Hövelhof
+49 (0) 5257-9850-0
http://www.kaimann.com
Emergency Contacts
NHS
111
NHS 24
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, isoalkanes, cyclics, < 5 % n-hexane EC: 926-605-8 | 64742-49-0 | 35 - 50% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 25 - 35% | Yes |
| cyclohexane EC: 203-806-2 | 110-82-7 | 10 - 15% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 2.5 - 5% | Yes |
| n-hexane EC: 203-777-6 | 110-54-3 | 1 - 2.5% | Yes |
| Rosin EC: 232-475-7 | 8050-09-7 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Immediate Medical Attention
Consult physician in case of symptoms (inhalation, swallowing, or persistent eye symptoms).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam extinguishing agent, CO2, extinguishing powder or water jet. Fight larger fire with alcohol-resistant foam.
Water with a full water jet.
Can be released in case of fire: Carbon monoxide (CO)
Do not inhale explosion gases or combustion gases.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or water bodies. Prevent material from reaching sewage system, holes and cellars. Prevent from spreading (e.g. by damming-in or oil barriers).
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle container with care.
Store in cool, dry place in tightly closed containers.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7. Additional information about design of technical systems: No further data; see item 7.
Impervious gloves (EN 374). Material of gloves: Recommended thickness of the material: ≥ 0.7 mm, LLDPE gloves. Penetration time of glove material: Value for the permeation: Level ≤ 1. Gloves made of the following material are suitable for the permanent contact with this material in work areas which do not have an above-average risk of injury (e.g. laboratories): LLDPE gloves. For the permanent contact gloves made of the following materials are suitable: LLDPE gloves. For permanent contact of max. 15 minutes, gloves made of the following materials are suitable: Butyl rubber, BR. To protect against splashing, gloves made of the following materials are suitable: Chloroprene rubber, CR. Not suitable are gloves made of the following materials: Leather gloves, Strong gloves.
Safety glasses recommended during refilling and spraying. Safety glasses.
Use breathing protection in case of insufficient ventilation (EN 14387). Short term filter device: Filter AX (boining point < 61 °C); Filter A (boiling point > 60 °C). Only when applied by spray methods, if no adequate extraction system is in place (EN 149). Filter A/P2
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Forms explosive gas mixture with air; Develops readily flammable gases / fumes; Used empty containers may contain product gases which form explosive mixtures with air; Can form explosive mixtures in air if heated above flash point and/or when sprayed or atomised
No decomposition if used according to specifications.
strong acids and alkali
Hydrocarbons, Inflammable gases/vapours, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kaiflex® Spezialkleber 414 / Special Adhesive 414?
The signal word is danger.
What is the physical form of Kaiflex® Spezialkleber 414 / Special Adhesive 414?
Kaiflex® Spezialkleber 414 / Special Adhesive 414 is a fluid with according to product specification color. It has characteristic odor.
What is Kaiflex® Spezialkleber 414 / Special Adhesive 414 used for?
Adhesives
What are the hazard statements for Kaiflex® Spezialkleber 414 / Special Adhesive 414?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Kaiflex® Spezialkleber 414 / Special Adhesive 414?
The melting point is Not determined and the boiling point is 60 °C.