NextSDS Logo
Safety Data Sheet EN

Taski Jontec Tensol Conc F3d

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Taski Jontec Tensol Conc F3d

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional use only. AISE-P401 - Floor cleaner. Semi-automatic process AISE-P403 - Floor cleaner. Manual process

Uses advised against

Uses other than those identified are not recommended

Manufacturers & Suppliers

D

Diversey Europe Operations BV

manufacturer

Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands

D

Diversey Ltd

manufacturer

Weston Favell Centre, Northampton NN3 8PD, United Kingdom

01604 405311

Emergency Contacts

Emergency Contact

0800 052 0185

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
STOT SE Cat. 3 H336
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin and serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P403 + P235 Store in a well-ventilated place. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
propan-2-ol EC: 200-661-7 67-63-0 20 - 30% Yes
alkyl alcohol alkoxylate 111905-53-4 20 - 30% Yes
ethanediol EC: 203-473-3 107-21-1 3 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE, doctor or physician if you feel unwell.

Symptoms: May cause drowsiness or dizziness.

Skin contact

Take off immediately all contaminated clothing and wash it before re-use.

Symptoms: Causes irritation.

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Symptoms: Causes severe irritation.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Take off contaminated clothing before reuse. Store used personal protective equipment separately. Use only with adequate ventilation.

Storage

Store in accordance with local and national regulations. Store in a well-ventilated place. Store in a closed container. Keep only in original packaging. Keep cool. Keep away from heat and direct sunlight.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing.

Fire prevention

Keep away from flames and hot surfaces. No smoking. Keep away from heat. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.

Hands

Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.

Eyes

Undiluted: Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 166). Diluted: No special requirements under normal use conditions.

Respiratory

Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.

Skin/Body

Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.

Environmental

Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Colourless
Colour Intensity
---
Form
---
Odor
Slightly perfumed To Match Standard (TMS)
Odor Threshold
Not applicable
Ph
≈ 9 (neat)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
≈ 36 °C (closed cup)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not relevant for classification of this product.
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
≈ 0.97 (20 °C)
Bulk Density
---
Density
---
Flammability
Flammable.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive
Dynamic Viscosity
---
Kinematic Viscosity
Not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

None known under normal use conditions.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1987
Shipping Name
Alcohols, n.o.s. (isopropanol)
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Taski Jontec Tensol Conc F3d?

The signal word is warning.

What is the physical form of Taski Jontec Tensol Conc F3d?

Taski Jontec Tensol Conc F3d is a liquid with clear, colourless color. It has slightly perfumed to match standard (tms) odor.

What is Taski Jontec Tensol Conc F3d used for?

For professional use only. AISE-P401 - Floor cleaner. Semi-automatic process AISE-P403 - Floor cleaner. Manual process

What are the hazard statements for Taski Jontec Tensol Conc F3d?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin and serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Taski Jontec Tensol Conc F3d?

The melting point is Not determined and the boiling point is Not determined.