NextSDS Logo
Safety Data Sheet EN

Taski Jontec Tensol ID F3d

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Taski Jontec Tensol ID F3d

Regulatory Identifiers

CAS Number
N/A
UFI Code
RD56-Y02W-A000-4ACK

Identified Uses

Floor cleaner. For professional use only.

Uses advised against

Uses other than those identified are not recommended. SWED - Sector-specific worker exposure description : AISE_SWED_PW_8a_2 AISE_SWED_PW_4_1 AISE_SWED_PW_10_1 AISE_SWED_PW_19_1

Manufacturers & Suppliers

D

Diversey B.V.

manufacturer

De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542 DN Utrecht]

030-2476911

Emergency Contacts

NVIC

088 755 8000

NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Acute Tox. Cat. 4 H302
STOT SE Cat. 3 H336
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P403 + P235 Store in a well-ventilated place. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propan-2-ol EC: 200-661-7 67-63-0 20 - 30% Yes
alkyl alcohol alkoxylate 111905-53-4 20 - 30% Yes
ethanediol EC: 203-473-3 107-21-1 3 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE, doctor or physician if you feel unwell.

Symptoms: May cause drowsiness or dizziness.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before reuse. Call a POISON CENTRE, doctor or physician if you feel unwell. If skin irritation occurs: Get medical advice or attention.

Symptoms: skin irritation

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.

Symptoms: irritation

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Call a POISON CENTRE, doctor or physician. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Immediate Medical Attention

Call a POISON CENTRE, doctor or physician if you feel unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Turn off all sources of ignition. Ventilate the area. Ensure adequate ventilation.

Large spill

Dyke to collect large liquid spills.

Environmental

Dilute with plenty of water. Do not allow to enter drainage system, surface or ground water.

Cleanup methods

Absorb with liquid-binding material. Do not place spilled materials back into the original container. Collect in closed and suitable containers for disposal.

Materials: sand, diatomite, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Store used personal protective equipment separately. Avoid contact with skin and eyes. Do not breathe vapours. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area.

Storage

Store in a well-ventilated place. Store in a closed container. Keep only in original packaging. Keep cool. Keep away from heat and direct sunlight.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Store used personal protective equipment separately. Do not eat, drink or smoke when using this product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under normal use conditions.

Hands

No special requirements under normal use conditions.

Eyes

Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 16321).

Respiratory

No special requirements under normal use conditions.

Skin/Body

No special requirements under normal use conditions.

Environmental

Should not reach sewage water or drainage ditch undiluted or unneutralised.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
Clear , Colourless
Ph
≈ 9 (neat)
Cloud Point
---
State Under Standard Conditions
---
Metal Corrosion
Not corrosive
Density
---
Auto Ignition Temperature
Not determined
Flash Point
≈ 36 °C closed cup
Kinematic Viscosity
Not determined
Physical State
Liquid
Explosive Limits
---
Dynamic Viscosity
---
Decomposition Temperature
Not applicable.
Vapor Density
---
Form
---
Solubility In Water
Fully miscible
Solidification Point
---
Partition Coefficient
---
Melting Point
Not determined
Softening Point
---
Colour Intensity
---
Properties Status
---
Voc Content
---
Molecular Weight
---
Physical State Data
liquid
Relative Density
≈ 0.97 (20 °C)
Upper Explosive Limit
Not determined
Crystallisation Point
---
Boiling Point
Not determined
Vapor Pressure
Not determined
Solubility
---
Odor Threshold
Not applicable
Odor
Herbal
Appearance
---
Relative Evaporation Rate
---
Freezing Point
---
Flammability
---
Bulk Density
---
Lower Explosive Limit
Not determined
Solubility In Fat
---
Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

None known under normal use conditions.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1987
Shipping Name
Alcohols, n.o.s. (isopropanol)
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Taski Jontec Tensol ID F3d?

The signal word is warning.

What is the physical form of Taski Jontec Tensol ID F3d?

Taski Jontec Tensol ID F3d is a liquid with clear , colourless color. It has herbal odor.

What is Taski Jontec Tensol ID F3d used for?

Floor cleaner. For professional use only.

What are the hazard statements for Taski Jontec Tensol ID F3d?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapour.
  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Taski Jontec Tensol ID F3d?

The melting point is Not determined and the boiling point is Not determined.