NextSDS Logo
Safety Data Sheet EN

Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution
Product Code
CL06.1308

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

A

AnalytiChem Belgium NV

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

Emergency Contact

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H225 Highly flammable liquid and vapour.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces. No smoking.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanol denaturated with Eurodenaturant (Disolol®) 64-17-5 90% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Fresh air.

Skin contact

Wash off with plenty of water. Remove contaminated clothing.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open.

Ingestion

Never give anything by mouth to an unconscious person. Immediately make victim drink water (two glasses at most).

Immediate Medical Attention

Immediately call an ophthalmologist. Call in physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical or carbon dioxide.

Unsuitable media

Do not use water.

Specific hazards

Combustible. Vapours heavier than air. Forms explosive mixtures with air at ambient temperatures. Development of hazardous combustion gases or vapours possible in the event of fire.

Instructions

Cool container with spray water from a save distance.

Firefighter Protection

Do not stay in dangerous zone without self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not inhale vapours/aerosols. Avoid substance contact. Ensure supply of fresh air in enclosed rooms.

Environmental

Do not allow to enter sewerage system; risk of explosion!

Cleanup methods

Absorb on vermiculite, sand or a pillow from Chemical Spill Center.

Materials: vermiculite, sand or a pillow from Chemical Spill Center

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use non sparking tools. For precautions see section 2.2

Storage

Closed in a well ventilated place. Recommended storage temperature see product label.

Fire prevention

Use non sparking tools.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1. Work under hood.

Hands

Required.

Eyes

Required.

Respiratory

Wear gas mask. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Yes (antistatic).

Environmental

Do not allow to enter sewerage system; risk of explosion!

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Solubility
---
Vapor Density
---
Physical State
Liquid
Solubility In Water
soluble
Upper Explosive Limit
12.0 vol%
Cloud Point
---
Voc Content
---
Form
Liquid
Flammability
---
Colour
---
Dynamic Viscosity
---
Physical State Data
liquid
Odor Threshold
---
Boiling Point
78°C
Auto Ignition Temperature
370°C
Crystallisation Point
---
Molecular Weight
---
Partition Coefficient
---
Solidification Point
---
Colour Intensity
---
Solubility In Fat
---
Bulk Density
---
Explosive Limits
---
Lower Explosive Limit
2 vol%
Odor
alcoholic
Freezing Point
---
Appearance
---
Properties Status
---
Relative Evaporation Rate
---
Ph
---
Evaporation Rate
---
State Under Standard Conditions
---
Decomposition Temperature
---
Melting Point
-114°C
Kinematic Viscosity
---
Metal Corrosion
---
Vapor Pressure
---
Density
0,79 g/ml
Softening Point
---
Flash Point
12°C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No further relevant information available.

Reactivity

See section 10.3

Hazardous reactions

avoid contact with oxidizing products

Avoid

No further relevant information available.

Incompatible

oxidizing products

Decomposition

No further relevant information available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
Flammable liquid, n.o.s. (Ethanol Solution)
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution?

The signal word is danger.

What is the physical form of Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution?

Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution is a liquid . It has alcoholic odor.

What is Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution used for?

Reagent for analysis

What are the hazard statements for Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapour.

What is the melting point of Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution?

The melting point is -114°C and the boiling point is 78°C.