Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur
- Product Code
- 106076
Regulatory Identifiers
- CAS Number
- 493-52-7 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Reagent for analysis, Chemical production
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Formula C₁₀H₁₅N₃O₂ (Hill) EC-No. 207-776-1
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(4-dimethylaminophenylazo)benzoic acid (<= 100 %) EC: 207-776-1 | 493-52-7 | 100% | Yes |
Product name Methyl red (C.I. 13020) indicator ACS,Reag. Ph Eur; Catalogue No. 106076; Molar mass 269,31 g/mol
Notes
*) A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water.
make victim drink water (two glasses at most).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Carbon dioxide (CO2), Foam, Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not empty into drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Methyl orange (C.I. 13025) indicator ACS, Reag. Ph Eur
---
Methyl orange (C.I. 13025) indicator ACS, Reag. Ph Eur
CAS: 547-58-0
Bromothymol blue indicator ACS,Reag. Ph Eur
---
Bromophenol blue indicator ACS, Reag. Ph Eur
CAS: 115-39-9
Bromophenol blue indicator ACS,Reag. Ph Eur
CAS: 115-39-9
Methyl red 200 mg/l - Bromocresol green 1 g/l mixture in ethanol indicator solution
---
Bromocresol purple indicator ACS,Reag. Ph Eur
CAS: 115-40-2
Neutral red (C.I. 50040) indicator and for microbiology
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Dry. Recommended storage temperature see product label.
Change contaminated clothing. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: - Glove material: Nitrile rubber - Glove thickness: 0,11 mm - Break through time: > 480 min splash contact: - Glove material: Nitrile rubber - Glove thickness: 0,11 mm - Break through time: > 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when dusts are generated. Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
Violent reactions possible with: Strong oxidizing agents
no information available
no information available
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur?
The signal word is na: r-phrases.
What is the physical form of Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur?
Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur is a solid with reddish-violet color. It has weak odor.
What is Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur used for?
Reagent for analysis, Chemical production
What is the melting point of Methyl red (C.I. 13020) indicator ACS, Reag. Ph Eur?
The melting point is 178 - 182 °C and the boiling point is No information available..