NextSDS Logo
Safety Data Sheet EN

Ethylenediaminetetraacetic acid manganese disodium salt hydrate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ethylenediaminetetraacetic acid manganese disodium salt hydrate
Product Code
40519
Chemical Name
Ethylenediaminetetraacetic acid manganese disodium salt hydrate

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals.

Uses advised against

No Information available

Manufacturers & Suppliers

A

Avocado Research Chemicals Ltd. (Part of Thermo Fisher Scientific)

manufacturer

Shore Road, Heysham Lancashire, LA3 2XY, United Kingdom

+44 (0) 1524 850506

Emergency Contacts

Emergency Contact

001-800-227-6701

Emergency Contact

+32 14 57 52 11

Emergency Contact

001-201-796-7100

Emergency Contact

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Ethylenediaminetetraacetic acid<br>manganese disodiumsalthydrate --- 100% No
Disodium manganese<br>ethylenediaminetetraacetate 15375-84-5 --- No

_Full text of Hazard Statements: see section 16_

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Get medical attention immediately if symptoms occur.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO 2). Powder. Water spray.

Unsuitable media

No information available.

Specific hazards

Thermal decomposition can lead to release of irritating gases and vapors.

Instructions

In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Use personal protective equipment as required.

Environmental

Should not be released into the environment.

Cleanup methods

Sweep up and shovel into suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment/face protection. Avoid contact with skin, eyes or clothing. Avoid ingestion and inhalation.

Storage

Keep container tightly closed in a dry and well-ventilated place.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None under normal use conditions.

Hands

Protective gloves. Glove material: Natural rubber, Nitrile rubber, Neoprene, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. Glove comments: (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

Eyes

Wear safety glasses with side shields (or goggles) (European standard - EN 166)

Respiratory

No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation. Recommended half mask:- Valve filtering: EN405; or; Half mask: EN140; plus filter, EN 141

Skin/Body

Long sleeved clothing.

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Metal Corrosion
---
Form
---
Molecular Weight
389.13(anhy)
Upper Explosive Limit
---
Voc Content
---
Odor Threshold
No data available
Solubility In Water
Insoluble in water
Solubility
---
Softening Point
No data available
Decomposition Temperature
No data available
Density
No data available
Physical State
Solid
Relative Evaporation Rate
---
Colour Intensity
---
Physical State Data
solid
Freezing Point
---
Flash Point
No information available
Bulk Density
No data available
Appearance
Yellow Brown
Cloud Point
---
Flammability
Not applicable
Kinematic Viscosity
---
State Under Standard Conditions
---
Solubility In Fat
---
Crystallisation Point
---
Colour
---
Vapor Pressure
No data available
Auto Ignition Temperature
No data available
Evaporation Rate
Not applicable - Solid
Dynamic Viscosity
---
Properties Status
---
Relative Density
---
Lower Explosive Limit
---
Solidification Point
---
Explosive Limits
---
Ph
Not applicable
Odor
Odorless
Vapor Density
Not applicable
Boiling Point
No information available
Melting Point
No data available
Partition Coefficient
Disodium manganese ethylenediaminetetraacetate: -8.12
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing. Hazardous Polymerization: No information available.

Avoid

Incompatible products. Excess heat.

Incompatible

Oxidizing agent.

Decomposition

Carbon monoxide (CO). Carbon dioxide (CO2). Nitrogen oxides (NOx). Metal oxides. Sodium oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ethylenediaminetetraacetic acid manganese disodium salt hydrate?

The signal word is no signal word.

What is the physical form of Ethylenediaminetetraacetic acid manganese disodium salt hydrate?

Ethylenediaminetetraacetic acid manganese disodium salt hydrate is a solid appearing as yellow brown . It has odorless odor.

What is Ethylenediaminetetraacetic acid manganese disodium salt hydrate used for?

Laboratory chemicals.

What is the melting point of Ethylenediaminetetraacetic acid manganese disodium salt hydrate?

The melting point is No data available and the boiling point is No information available.