Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Grease HTG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Interflon BV
manufacturer
Belder 47, 4704 RK Roosendaal, Netherlands
+31 (0)165 553911
http://www.Interflon.com
Emergency Contacts
Emergency Contact
+31 (0)165 55 39 11
Monday to Friday from 8:30am to 17:00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylene Carbonate | 108-32-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Get medical advice/attention if you feel unwell.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water mist, Fire extinguishing powder, Carbon dioxide (CO2)
Water jet
May produce toxic fumes of carbon monoxide if burning.
In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Special danger of slipping by leaking/spilling product.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece)
Materials: cloth, fleece
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas.
Store in accordance with local/regional/national/international regulations. Keep container tightly closed and in a wellventilated place. Keep in a cool place.
Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.
Flammability hazards. Keep in a cool place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
Not applicable.
Use protective eyewear to guard against splash of liquids. Avoid contact with eyes.
In case of insufficient ventilation, wear suitable respiratory equipment. Not applicable.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers, Strong oxidisers
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Grease HTG?
The signal word is no signal word.
What is the physical form of Interflon Grease HTG?
Interflon Grease HTG is a liquid with dark brown color. It has like oil odor.
What is the solubility of Interflon Grease HTG?
not determined
What is Interflon Grease HTG used for?
Lubricant
What is the melting point of Interflon Grease HTG?
The melting point is not determined and the boiling point is not determined.