Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Grease
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
lubricant
Manufacturers & Suppliers
Interflon BV
manufacturer
Belder 47, 4704 RK Roosendaal, Netherlands
+31 (0)165 553911
http://www.Interflon.com
Interflon USA, Inc
importer
555 West Merrill St., Birmingham
1 (877) 491 7981
Emergency Contacts
Poison control - National Capitol Poison Center
1-800-222-1222
Emergency Contact
1 (877) 346-5823
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of mineral oils, thickener, additives and MicPol®
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9, isoalkanes | 64741-66-8 | 10 - 25% | Yes |
| butane | 106-97-8 | 10 - 25% | Yes |
| propane | 74-98-6 | 10 - 25% | Yes |
| isobutane | 75-28-5 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.
Thaw frosted parts with lukewarm water. Do not rub affected area.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance. In case of respiratory tract irritation, consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Water mist, Fire extinguishing powder, Carbon dioxide (CO2), Alcohol resistant foam
Water jet
In case of insufficient ventilation and/or in use, may form flammable/explosive vapor-air mixture. Contact with the product can cause burns and/or frostbite. Contains gas under pressure; may explode if heated.
Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapors/dust/aerosols/gases.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Place in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Take precautionary measures against static discharge. Use only in well-ventilated areas. Ground/bond container and receiving equipment.
Keep container tightly closed and in a well-ventilated place. Keep in a cool place. Protect from sunlight.
Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.
Take precautionary measures against static discharge. Ground/bond container and receiving equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Type of material. NBR: acrylonitrile-butadiene rubber. CR: chloroprene (chlorobutadiene) rubber. PVC: polyvinyl chloride.
Work with safety glasses.
In case of insufficient ventilation, wear suitable respiratory equipment. Type: A-P2 (combined filters against particles and organic gases and vapors, color code: Brown/White).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
The mixture contains reactive substance(s). Gas under pressure. Risk of ignition. If heated: Danger of explosion, Gas under pressure, Danger of bursting container
No known hazardous reactions.
Do not spray on an open flame or other ignition source. Keep away from heat. Protect from sunlight.
Oxidizers
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Toxic to aquatic life.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The mixture does not contain any substances assessed as PBT or vPvB.
12.6 Endocrine disrupting properties
The substance does not contain an endocrine disruptor (ED) in a concentration of ≥ 0.1%.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Dispose of this material and its container to hazardous or special waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
- Packing Group
- not assigned
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations specific for the product in question.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Grease?
The signal word is danger.
What is the physical form of Interflon Fin Grease?
Interflon Fin Grease is a liquid, gaseous (spray aerosol) appearing as liquid, gaseous (spray aerosol) with white color. It has mild odor.
What is the solubility of Interflon Fin Grease?
not determined
What is Interflon Fin Grease used for?
lubricant
What are the hazard statements for Interflon Fin Grease?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H280: Contains gas under pressure; may explode if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Interflon Fin Grease?
The melting point is not determined and the boiling point is <0 °C.