Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diresul Indiblue RDT-R liq
- Product Code
- 200728
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry sector : Textile processing industry Type of use : textile dye
Manufacturers & Suppliers
Archroma Ibérica S.L.
manufacturer
ZAL - Prat, c/ Cal Coracero, 46-56, 8820 El Prat de Llobregat (Barcelona)
+34 93 479 83 00
Emergency Contacts
Emergency Contact
+44 (0) 1235 239 670
24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium xylenesulphonate EC: 215-090-9 | 1300-72-7 | 4 - 6% | Yes |
| Sodium sulphide EC: 215-211-5 | 1313-82-2 | 1 - 2% | Yes |
| Sodium hydrogensulphide EC: 240-778-0 | 16721-80-5 | 1 - 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the victim to fresh air. Keep patient warm and at rest. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Take off contaminated clothing and shoes immediately. In case of contact, immediately flush skin with soap and plenty of water. Call a physician if irritation persists.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
IF SWALLOWED: Rinse mouth with water. Get medical attention immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
all
No restrictions
Carbon oxides, Nitrogen oxides (NOx), Sulphur oxides
Cool closed containers exposed to fire with water spray. Remove from danger zone
Firefighter Protection
Self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protective equipment. Unprotected persons must be kept away. Stay upwind/ keep distance from source.
The product should not be allowed to enter drains, water courses or the soil.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. If any hydrogen sulfide (H2S) is detected during use of the product, evacuate the workplace to a very well-ventilated area and call the Emergency Response Team.
Keep only in the original container in a cool, well-ventilated place.
Avoid contact with skin and eyes. Contact with acids liberates very toxic gas. Always work in a well-ventilated area; ensure that all packages and equipment where the dyes will be used are clean and free of contamination with undesired substances, particularly acids.
Keep away sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves (alkali-resistant) Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles
Alkali-resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
See section 10.3. "Possibility of hazardous reactions"
With acids hydrogen sulphide is produced.
Incompatible with strong acids and oxidizing agents.
strong acids and oxidizing agents
When used and handled as intended, none.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2801
- Shipping Name
- Dye, liquid, corrosive, n.o.s.
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diresul Indiblue RDT-R liq?
The signal word is danger.
What is the physical form of Diresul Indiblue RDT-R liq?
Diresul Indiblue RDT-R liq is a liquid with dark blue color. It has yes odor.
What is Diresul Indiblue RDT-R liq used for?
Industry sector : Textile processing industry Type of use : textile dye
What are the hazard statements for Diresul Indiblue RDT-R liq?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Diresul Indiblue RDT-R liq?
The melting point is Not applicable and the boiling point is approximately 100 °C.