Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diresul Black RDT-D liq
- Product Code
- 110602
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry sector : Textile processing industry Type of use : textile dye
Manufacturers & Suppliers
Archroma Ibérica S.L.
manufacturer
ZAL - Prat, c/ Cal Coracero, 46-56, 8820 El Prat de Llobregat (Barcelona)
+34 93 479 83 00
Emergency Contacts
Emergency Contact
+44 (0) 1235 239 670
24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical advice/ attention.
In case of contact, immediately flush skin with plenty of water. If skin irritation occurs: Get medical advice/ attention.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, rinse mouth with water (only if the person is conscious). In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Immediate Medical Attention
Get medical advice/ attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, Alcohol-resistant foam, Dry powder, Carbon dioxide (CO2)
High volume water jet
Carbon oxides, Nitrogen oxides (NOx), Sulphur oxides
Firefighter Protection
Self-contained breathing apparatus, Full protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Collect contaminated fire extinguishing water separately. The product should not be allowed to enter drains, water courses or the soil.
Soak up with inert absorbent material
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. Avoid contact with skin and eyes. Keep away from oxidising agents and acids.
Keep containers tightly closed in a cool, well-ventilated place. Do not freeze.
Avoid contact with skin and eyes. Contact with acids liberates very toxic gas. Always work in a well-ventilated area; ensure that all packages and equipment where the dyes will be used are clean and free of contamination with undesired substances, particularly acids.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local ventilation recommended - mechanical ventilation may be used.
Long-term exposure: Impervious butyl rubber gloves, Minimum breakthrough time / gloves : 480 min, Minimum thickness / gloves 0,7 mm. For short-term exposure (splash protection): Nitrile rubber gloves, Minimum breakthrough time / gloves : 30 min, Minimum thickness / gloves 0,4 mm. These types of protective gloves are offered by various manufacturers. Please note the manufacturers' detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)
No respiratory protection required in normal use. Use self-contained breathing apparatus if hydrogen sulfide (rotten egg odor) detected from improper use of product.
working clothes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
See section 10.3. "Possibility of hazardous reactions"
With acids hydrogen sulphide is produced.
Incompatible with strong acids and oxidizing agents.
No hazardous decomposition products if stored and handled as prescribed
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2801
- Shipping Name
- Dye, liquid, corrosive, n.o.s.
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diresul Black RDT-D liq?
The signal word is danger.
What is the physical form of Diresul Black RDT-D liq?
Diresul Black RDT-D liq is a liquid with black color. It has yes odor.
What is Diresul Black RDT-D liq used for?
Industry sector : Textile processing industry Type of use : textile dye
What are the hazard statements for Diresul Black RDT-D liq?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Diresul Black RDT-D liq?
The melting point is Not applicable and the boiling point is approximately 100 °C.