NextSDS Logo
Safety Data Sheet EN

Metaphosphoric acid

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Metaphosphoric acid
Product Code
AC450250000; AC450250025; AC450251000; AC450255000
Synonyms
Phosphoric acid, meta

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals.

Uses advised against

No Information available

Manufacturers & Suppliers

F

Fisher Scientific

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

A

Acros Organics

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

Emergency Contacts

Emergency Contact

001-800-ACROS-01

Emergency Contact

+32 14 57 52 11

Emergency Contact

001-201-796-7100

Emergency Contact

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B
Eye Dam. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H314 Causes severe skin burns and eye damage
H335 May cause respiratory irritation

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER or doctor/physician
P363 Wash contaminated clothing before reuse
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Metaphosphoric acid, sodium salt 50813-16-6 40 - 66% No
Metaphosphoric acid 37267-86-0 33 - 60% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with a respiratory medical device.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Do not induce vomiting. Call a physician or Poison Control Center immediately.

Symptoms: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO₂). Dry chemical. chemical foam.

Unsuitable media

No information available

Specific hazards

Corrosive Material. Thermal decomposition can lead to release of irritating gases and vapors.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas.

Environmental

Avoid release to the environment. See Section 12 for additional ecological information.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only under a chemical fume hood. Ensure adequate ventilation. Avoid dust formation. Do not get in eyes, on skin, or on clothing. Do not breathe dust. Do not ingest.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Corrosives area.

Hygiene

Do not get in eyes, on skin, or on clothing. Do not breathe dust. Do not ingest.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only under a chemical fume hood. Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.

Hands

Wear appropriate protective gloves

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Skin/Body

Wear appropriate protective clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
No data available
Metal Corrosion
---
Lower Explosive Limit
No data available
Dynamic Viscosity
---
Voc Content
---
Density
---
Boiling Point
No information available
Freezing Point
---
Vapor Pressure
No information available
Partition Coefficient
No data available
Flash Point
No information available
Molecular Weight
---
Colour
---
Physical State Data
solid
Relative Density
No information available
Decomposition Temperature
No information available
Solubility
No information available
Vapor Density
Not applicable
Flammability
No information available
Solubility In Fat
---
Upper Explosive Limit
No data available
Crystallisation Point
---
Appearance
Colorless
Properties Status
---
Solubility In Water
---
Odor
Odorless
Relative Evaporation Rate
---
Softening Point
---
State Under Standard Conditions
---
Form
---
Cloud Point
---
Ph
No information available
Physical State
Solid
Auto Ignition Temperature
---
Odor Threshold
No information available
Solidification Point
---
Explosive Limits
---
Colour Intensity
---
Evaporation Rate
Not applicable
Kinematic Viscosity
---
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions. Moisture sensitive.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing.

Avoid

Avoid dust formation. Incompatible products. Excess heat. Exposure to moisture.

Incompatible

Strong oxidizing agents, Strong bases

Decomposition

Oxides of phosphorus, Phosphorus trihydride (phosphine), Hydrogen

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3260
Shipping Name
CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Metaphosphoric acid known by?

Metaphosphoric acid is also known as: Phosphoric acid, meta

What is the hazard signal word for Metaphosphoric acid?

The signal word is danger.

What is the physical form of Metaphosphoric acid?

Metaphosphoric acid is a solid appearing as colorless . It has odorless odor.

What is the solubility of Metaphosphoric acid?

No information available

What is Metaphosphoric acid used for?

Laboratory chemicals.

What are the hazard statements for Metaphosphoric acid?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage
  • H335: May cause respiratory irritation

What is the melting point of Metaphosphoric acid?

The melting point is No data available and the boiling point is No information available.