Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cyclo-2245 (D5) Cyclomethicone
- Product Code
- Cyclo-2245 (D5)
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Clearco Products Co Inc.
manufacturer
15 York Road, Willow Grove, PA 19090 U.S.A.
215-366-7860
Emergency Contacts
CHEM TEL
1-800-255-3924
CHEM TEL
+01-813-248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Decamethylcyclopentasiloxane
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Decamethylcyclopentasiloxane | --- | 96 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Wash with water and soap as a precaution. Get medical attention if symptoms occur.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Dry chemical, Carbon dioxide (CO2)
High volume water jet
Do not use a solid water stream as it may scatter and spread fire. Flash back possible over considerable distance. Vapors may form explosive mixtures with air. Fire burns more vigorously than would be expected. Exposure to combustion products may be a hazard to health.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow safe handing advice and personal protective equipment recommendations.
For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g. by containment or oil barriers). Retain and dispose of contaminated wash water.
Soak up with inert absorbent. Suppress (knock down) gases/vapors/mists with a water spray jet. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapor or mist. Handle in accordance with good industrial hygiene and safety practice. Keep containers tightly closed. Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labelled containers. Keep tightly closed. Keep in a cool, well-ventilated place. Store in accordance with the particular national regulations. Keep away from heat and sources of ignition.
Handle in accordance with good industrial hygiene and safety practice.
Keep away from heat and sources of ignition. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Combustible liquid. Vapors may form explosive mixture with air. Use at elevated temperatures may form highly hazardous components. Can react with strong oxidizing agents. Hazardous decomposition products will be formed at elevated temperatures
Heat, flames and sparks
Oxidizing agents
Formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Decamethylcyclopentasiloxane, Dodecamethyl cyclohexasiloxane)
- Transport Class
- CBL
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cyclo-2245 (D5) Cyclomethicone?
The signal word is warning.
What is the physical form of Cyclo-2245 (D5) Cyclomethicone?
Cyclo-2245 (D5) Cyclomethicone is a liquid with colorless color.
What are the hazard statements for Cyclo-2245 (D5) Cyclomethicone?
This substance has 1 hazard statement:
- H227: Combustible liquid.
What is the melting point of Cyclo-2245 (D5) Cyclomethicone?
The melting point is No data available and the boiling point is 211°C.