Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ECO-SOL MAX, ESL3-CY/ESL3-4CY
- Product Code
- ESL3-CY/ESL3-4CY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Inkjet Printing
Manufacturers & Suppliers
Roland DG Benelux NV
manufacturer
Bell-Telephonelaan 2G, B-2440 Geel, Belgium
+32 14 57 59 11
http://www.rolanddg.be
Emergency Contacts
Giftnotruf Bonn
+49 228 19240
24h
Roland DG Benelux NV
+32 14 57 59 11
Only available during office hours.
Centre Antipoisons Belge - Belgisch Antigifcentrum
+32 70 245 245
24h
centre antipoison et de toxicovigilance, Paris
+33 1 40 05 48 48
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of irregular breathing or respiratory arrest provide artificial respiration. Consult physician immediately.
After contact with skin, wash immediately with plenty of water and soap. Take off contaminated clothing and wash it before reuse. In case of skin irritation, consult a physician.
In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist.
Do NOT induce vomiting. Consult physician immediately.
Immediate Medical Attention
Consult physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Carbon dioxide (CO2), Foam, Dry extinguishing powder
Firefighter Protection
Wear full chemical protective clothing. Use appropriate respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See protective measures under point 7 and 8.
Do not allow to enter into surface water or drains. Treat the recovered material as prescribed in the section on waste disposal.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
ECO-SOL MAX, ESL3-YE/ESL3-4YE
---
ECO-SOL MAX, ESL3-MG/ESL3-4MG
---
ECO-SOL MAX2, ESL4-CL2
---
ECO-SOL MAX, ESL3-BK/ESL3-4BK
---
ECORIC 60, ECORIC 60/MB, ECORIC 80, ECORIC 80/MB, ECORIC 810, ECORIC 810/MB
---
CLEANING LIQUID, (ESL5) 100ML, CLEANING LIQUID, (ESL5) 500ML, ECO-UV, ESL5P-CL
---
ECO 2
---
ecovio® PS1606
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Handle and open container with care. All work processes must always be designed so that the following is as low as possible: Inhalation, Skin contact, Eye contact. When using do not eat, drink, smoke, sniff.
Keep only in original container. Protect from sunlight. Protect against: Frost, Heat
When using do not eat, drink, smoke, sniff.
Keep away from sources of ignition. - No smoking. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
not required.
not required.
Respiratory protection necessary at: insufficient ventilation, insufficient exhaust.
Body protection: not required.
Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
No hazardous reaction when handled and stored according to provisions.
Frost, Heat
Oxidising agent
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ECO-SOL MAX, ESL3-CY/ESL3-4CY?
The signal word is danger.
What is the physical form of ECO-SOL MAX, ESL3-CY/ESL3-4CY?
ECO-SOL MAX, ESL3-CY/ESL3-4CY is a liquid with blue color. It has characteristic odor.
What is ECO-SOL MAX, ESL3-CY/ESL3-4CY used for?
Inkjet Printing
What are the hazard statements for ECO-SOL MAX, ESL3-CY/ESL3-4CY?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H360: May damage fertility or the unborn child.
What is the melting point of ECO-SOL MAX, ESL3-CY/ESL3-4CY?
The melting point is not determined and the boiling point is not determined.