Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PERISTAL E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile auxiliary: pH-regulator
Manufacturers & Suppliers
Textilchemie Dr. Petry GmbH
manufacturer
Ferdinand-Lassalle-Str. 57, 72770 Reutlingen, Germany
+49 7121 9589-0
http://www.drpetry.de
Textilchemie Dr. Petry GmbH
manufacturer
+49 7121 9589-0
Emergency Contacts
Textilchemie Dr. Petry GmbH
+49 7121 9589-0
Mo – Fr, 8:00 – 17:00 GMT+1(+2)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Inorganic salts and organic acids
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetic acid EC: 200-580-7 | 64-19-7 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person into fresh air, keep warm and allow to rest.
Symptoms: Respiratory complaints
After contact with skin, wash immediately with soap and plenty of water. In case of contamination, take off clothes and shoes immediately.
Wash immediately 10 – 15 min with plenty of water at open palpebral fissure.
Rinse mouth immediately and drink plenty of water.
Immediate Medical Attention
In case of skin irritation, consult a physician. In case of eye irritation, consult an ophthalmologist. Get medical advice if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, CO2, dry extinguishing powder
Dangerous combustion products or gases: none
Firefighter Protection
Not necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb immediately because of danger of skidding.
Do not allow to enter drains/surface water/ground-water. Keep away from ground water. The product must not get into water without pretreatment (biological sewage purification plant).
Absorb with absorbent material for disposal.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide for good ventilation and exhaust. Avoid formation of aerosols and dust. Do not breath gas/fume/vapour/spray. In case of open contact, local exhaustion should be possibly used. Avoid contact with skin. Avoid contact with eyes. Use only outdoors or in a well-ventilated area.
Store in a cool, well aired place. Keep in tightly closed original packing unit.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Impermeable gloves of butyl rubber. Protective gloves persistent to chemicals according to EN 374. The selection of suitable gloves does not depend only on the material but also on further characteristics particularly on the layer thickness. The penetration times must not fall below: 480 min (Full contact), or 30 min (splash contact). These minimum requirements have to be guaranteed by the manufacturer.
Tightly closing protecting glasses.
Not necessary in general, but observe limit values of workstation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
If the product is stored and handled correctly, no dangerous reactions are known.
None, if used duly.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PERISTAL E?
The signal word is warning.
What is the physical form of PERISTAL E?
PERISTAL E is a liquid with colourless – yellowish color. It has acidic odor.
What is PERISTAL E used for?
Textile auxiliary: pH-regulator
What are the hazard statements for PERISTAL E?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.