NextSDS Logo
Safety Data Sheet EN

BioPrep® 3000 L

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BioPrep® 3000 L
Chemical Name
Enzyme preparation

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Novozymes' enzyme preparations are biocatalysts used in a variety of industrial processes and in certain consumer products.

Manufacturers & Suppliers

Novozymes A/S logo

Novozymes A/S

manufacturer

Krogshoejvej 36, 2880 Bagsvaerd, Denmark

+45 44460000

http://www.novozymes.com

Emergency Contacts

Emergency Contact

+45 44462223

24/7

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P285 In case of inadequate ventilation wear respiratory protection
P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Pectate Lyase (aep) EC: 232-766-9 9015-75-2 2.5 - 5% Yes
Proxel EC: 220-120-9 2634-33-5 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention. Show this safety data sheet to the doctor in attendance.

Symptoms: Shortness of breath, wheezing and coughing

Skin contact

Remove and wash contaminated clothing before re-use. Wash off immediately with plenty of water. If symptoms persist, call a doctor. Show this safety data sheet to the doctor in attendance.

Symptoms: Slight irritation

Eye contact

Hold eye open and rinse slowly and gently with water for 15-20 min. Remove contact lenses, if present, after the first five minutes, then continue rinsing eye. If symptoms persist, call a doctor. Show this safety data sheet to the doctor in attendance.

Symptoms: Slight irritation

Ingestion

Rinse mouth with water and drink plenty of water. If symptoms persist, call a doctor. Show this safety data sheet to the doctor in attendance.

Symptoms: Irritation

Immediate Medical Attention

If symptoms persist, call a doctor.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide

Specific hazards

May cause allergic respiratory reaction

Firefighter Protection

Self-contained breathing apparatus

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Collect spillage.

Cleanup methods

Take up by mechanical means preferably by a vacuum cleaner equipped with a high efficiency filter. Flush remainder carefully with plenty of water. Avoid splashing and high pressure washing (avoid formation of aerosols).

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid formation of dust and aerosols

Storage

Keep tightly closed in a dry and cool place. In unbroken packaging - dry and protect from the sun.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas

Hands

Protective gloves of e.g. nitrile rubber or neoprene (thickness > 0.3 mm) according to EN 374-3. Expected breakthrough time: > 4 hours. The recommendation is a qualified estimate based on the knowledge of the components in the mixture

Eyes

Safety glasses with side-shields

Respiratory

In case of insufficient ventilation wear an approved mask with a particle filter type P3 used according to the manufactures instruction

Skin/Body

Long sleeved clothing

Environmental

Local authorities should be advised if significant spillages cannot be contained. Waste water should be discharged to sewage treatment plant

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
---
Crystallisation Point
---
Odor Threshold
---
Vapor Density
---
Melting Point
---
Lower Explosive Limit
---
Physical State Data
liquid
State Under Standard Conditions
---
Molecular Weight
---
Flammability
---
Partition Coefficient
---
Solubility In Fat
---
Metal Corrosion
---
Solubility In Water
---
Relative Evaporation Rate
---
Upper Explosive Limit
---
Appearance
---
Solidification Point
---
Properties Status
---
Decomposition Temperature
---
Relative Density
---
Boiling Point
---
Colour
brown
Physical State
liquid
Dynamic Viscosity
---
Odor
Slight fermentation odor
Colour Intensity
---
Bulk Density
---
Density
1.1 g/ml
Form
---
Voc Content
---
Cloud Point
---
Ph
Not relevant
Flash Point
---
Kinematic Viscosity
---
Softening Point
---
Solubility
Active component is readily soluble in application-relevant solutions at all levels of concentration, temperature and pH which may occur in normal usage
Explosive Limits
---
Vapor Pressure
---
Freezing Point
---
Auto Ignition Temperature
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions

Reactivity

Not relevant

Hazardous reactions

None under normal processing

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BioPrep® 3000 L?

The signal word is danger.

What is the physical form of BioPrep® 3000 L?

BioPrep® 3000 L is a liquid with brown color. It has slight fermentation odor odor.

What is the solubility of BioPrep® 3000 L?

Active component is readily soluble in application-relevant solutions at all levels of concentration, temperature and pH which may occur in normal usage

What is BioPrep® 3000 L used for?

Novozymes' enzyme preparations are biocatalysts used in a variety of industrial processes and in certain consumer products.

What are the hazard statements for BioPrep® 3000 L?

This substance has 1 hazard statement:

  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled