Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Biorez Resin
- Product Form
- Polymeric furfuryl alcohol thermoset resin system, self crosslinking furan resin system
- Product Code
- BioRez 080101, BioRez120816, BioRez 050525, BioRez 141010, BioRez 120514 RF DAC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Thermosetting resin. Adhesive.
Uses advised against
No uses advised against.
Manufacturers & Suppliers
TransFurans Chemicals bvba
manufacturer
Industriepark, Leukaard 2, B-2440 Geel
+32(0)14 57 87 47
Emergency Contacts
Information centre on dangerous goods (BIG)
+32(0)14 58 45 45
24h/24 h
NL, FR, EN, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Furfuryl Alcohol EC: 202-626-1 | 98-00-0 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, rest.
Remove contaminated clothes, rinse skin with water or shower. Soap may be used.
First rinse with plenty of water (remove lenses if possible).
Rinse mouth and five lots of water to drink. Never give water to an unconscious person.
Immediate Medical Attention
Get medical advice/attention if irritation persists or if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, water, water spray BC powder, carbon dioxide.
Water jet, alcohol unstable foam.
Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Heat/fire exposure: wear self contained breathing apparatus. Heat/fire exposure: wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If available, observe corporate hazard-control and emergency plans.
Contain leaking substance, pump over in suitable containers. Plug the leak, cut off the supply.
shovel in closing drums
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Reduce/avoid exposure and/or contact.
Recommended storage temperature: 20 °C.
The usual precautionary measures when handling chemicals have to be observed. Do not eat, drink and smoke in work areas. Wash hands thoroughly with water and soap.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation and local exhaust ventilation.
Gloves natural rubber Breakthrough time ND (EN 374) Gloves neoprene Breakthrough time ND (EN 374)
Safety goggles.(EN 166)
High gas/vapour concentration: filter respirator for organic vapors (filter type A) (air protection factor (APF 10). (EN 14387)
Protective clothing (EN 340/EN 14605).
Direct polluted air of the local exhaust ventilation out of the plant in a manner in accordance with environmental regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under ambient conditions. The viscosity of the product will increase over time.
Not reactive.
The product will polymerize and harden at elevated temperatures (>80°C).
heat sources
oxidizing agents, strong acids, peroxides
Upon decomposition emits carbon monoxide, carbon dioxide and NOₓ.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Biorez Resin?
The signal word is no signal word.
What is the physical form of Biorez Resin?
Biorez Resin is a liquid appearing as liquid with dark brown color. It has mild and characteristic odor.
What is the solubility of Biorez Resin?
slightly water soluble (BioRez 080101,BioRez 050525, Biorez080108); Soluble in Furfuryl alcohol, ethanol, acetone...
What is Biorez Resin used for?
Thermosetting resin. Adhesive.
What is the melting point of Biorez Resin?
The melting point is Not applicable and the boiling point is Not applicable.