NextSDS Logo
Safety Data Sheet EN

global® Blastocyst Fast Freeze® Kit

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
global® Blastocyst Fast Freeze® Kit
Product Code
GFV5-005

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

LifeGlobal Group, LLC logo

LifeGlobal Group, LLC

manufacturer

393 Soundview Rd, Guilford, CT 06437 US

1-800-720-6375

www.LifeGlobalGroup.com

L

LifeGlobal Europe

distributor

Rue de la Presse 4, 1000 Brussels Belgium

32-2 227 1129

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 harmful if swallowed
May cause mild skin irritation

Precautionary Statements

Appropriate precautions should be taken to ensure that the patient is not sensitized to this antibiotic.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethylene Glycol 107-21-1 25% No
Sucrose 57-50-1 29% No
Glycerol 56-81-5 25% No
Sodium Chloride 7647-14-5 1% No
Potassium Chloride 7447-40-7 1% No
Calcium Chloride 10035-04-8 1% No
Potassium Phosphate 7778-77-0 1% No
Magnesium Sulfate 10034-99-8 1% No
Sodium Bicarbonate 144-55-8 1% No
Glucose 50-99-7 1% No
Sodium Lactate 72-17-3 1% No
Sodium Pyruvate 113-24-6 1% No
Amino Acids --- 1% No
EDTA 60-00-4 1% No
Phenol Red 143-74-8 1% No
HEPES 7365-45-9 1% No
Gentamicin Sulfate 1405-41-0 1% No
Human Serum Albumin 70024-90-7 2% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No specific treatment is necessary since this material is not likely to be hazardous by inhalation.

Skin contact

Wash with soap and water.

Eye contact

Flush with water. Get medical attention if irritation develops or persists.

Ingestion

Wash out mouth with water. Contact physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Not applicable.

Specific hazards

Not applicable.

Instructions

Not applicable.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

Use absorbent material to mop up spilled liquid.

Cleanup methods

Use absorbent material to mop up spilled liquid.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use care in handling and storage. Use aseptic working techniques at all times. Keep from freezing. Do not store at temperatures above 8°C. Close container after each use.

Storage

Avoid extreme temperatures. Keep away from sunlight. Do not freeze.

Hygiene

Use aseptic working techniques at all times.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special ventilation required.

Hands

Handle with gloves

Eyes

When splashing of the material may occur, goggles or a face shield is recommended. If splashing does occur flush immediately and thoroughly with copious quantities of water. Should serious reaction occur, seek medical attention immediately.

Respiratory

Under normal use conditions, with adequate ventilation, no special handling equipment is required.

Skin/Body

lab coat

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Clear Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
Clear Liquid
Odor
---
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Complete
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Incompatible

None known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for global® Blastocyst Fast Freeze® Kit?

The signal word is warning.

What is the physical form of global® Blastocyst Fast Freeze® Kit?

global® Blastocyst Fast Freeze® Kit is a clear liquid with colorless color.

What are the hazard statements for global® Blastocyst Fast Freeze® Kit?

This substance has 2 hazard statements:

  • H302: harmful if swallowed
  • May cause mild skin irritation