Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Drägersorb 400
- Product Code
- 6738950 (4,5kg), 6737965 (8kg), 6737985 (18kg), 6739454 (125kg), 6736882, R34360, 3702050
- Chemical Name
- Calcium hydroxide, sodium hydroxide
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 0HCA-SDNT-RM0A-KKKS
Identified Uses
Adsorbent or absorbent. Sector of uses [SU]: SU0 Other. Process categories [PROC]: PROC8a Transfer of substance or mixture (charging and discharging) at non-dedicated facilities, PROC0 Other. Environmental release categories [ERC]: ERC11a Widespread use of articles with low release (indoor). Article categories [AC]: AC2 Machinery, mechanical appliances, electrical/electronic articles. Remark: Adsorb's carbon dioxide from the air
Uses advised against
Do not use for private purposes (household).
Manufacturers & Suppliers
Dräger
manufacturer
Dräger Safety UK Ltd.
manufacturer
Ullswater Close, Blyth Riverside Business Park, UK-NE24 4RG Blyth; Northumberland
+44 1670 352891
http://www.draeger.com
Dräger
manufacturer
Emergency Contacts
National Poisons Information Service, West Midlands Poisons Unit
(0) 12 15 07 55 88
National Poisons Information Service, West Midlands Poisons Unit
(0) 12 15 07 55 89
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In the event of symptoms refer for medical treatment.
Wash immediately with: Water. In case of skin irritation, consult a physician.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
Do NOT induce vomiting. Let water be drunken in little sips (dilution effect).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2)
The product itself does not burn.
Co-ordinate fire-fighting measures to the fire surroundings.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Collect contaminated water / firefighting water separately. Do not allow to enter into surface water or drains.
Avoid dust formation.
Related Products
Similar products with comparable safety profiles
Drägersorb® 800 Plus / CLIC Absorber 800+ / Infinity ID CLIC Absorber 800+
---
Medisorb
---
Carbon Dioxide absorbents (Spherasorb, Intersorb Plus, LoFloSorb and canisters)
---
Dräger-Tubes™ (which are classified as dangerous goods, PG III)
---
SP-400™
---
MOBILGARD ADL 40
---
Sorbacal® H
---
Basorol® PE 10100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
While filling and pouring suck off filling place. Avoid the formation and deposition of dust. Use only alkali-resistant equipment. Do not return residues to the storage containers. Take the usual precautions when handling with chemicals. Avoid: Generation/formation of dust, Eye contact, Skin contact, Do not inhale dust.
Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Close container again moistureproof after taking sample.
When using do not eat, drink, smoke, sniff. Remove contaminated, saturated clothing immediately. Wash hands and face before breaks and after work and take a shower if necessary.
The product is not: Combustible. No special fire protection measures are necessary. Usual measures for fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
not determined
Gloves (alkali-resistant) Full contact: Glove material: nitrile rubber, glove thickness: 0.11 mm, Breakthrough time: > 480 min Splash contact: Glove material: nitrile rubber, glove thickness: 0.11 mm, Breakthrough time: > 480 min The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the resultant standard EN374. The above breakthrough times were measured with samples of the recommended glove types of KCL in laboratory tests to EN374. This recommendation applies only to the product stated in the safety that comes from us and the purpose specified by us. When dissolving in or mixing with other substances and under different conditions of the EN 374, you need to contact the supplier of CE-approved gloves (eg KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de)
safety goggles Do not wear contact lenses.
Suitable respiratory protection apparatus: Particle-filtering half mask, filter P2 In case of dust formation wear micro dust mask.
Light protective clothing.
not determined
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
not determined
not determined
Reactions with acids. Strong exothermic reaction with acids. Reactions with light metals in the presence of moisture, with evolution of hydrogen. Reactions with base metals, with evolution of hydrogen. In aqueous solution, evolves hydrogen with metals. Evolution of heat under influence of acids. Reactions with aluminium at high temperature.
Light metals
Hydrogen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Drägersorb 400?
The signal word is danger.
What is the physical form of Drägersorb 400?
Drägersorb 400 is a solid with white color. It has odourless odor.
What is Drägersorb 400 used for?
Adsorbent or absorbent. Sector of uses [SU]: SU0 Other. Process categories [PROC]: PROC8a Transfer of substance or mixture (charging and discharging) at non-dedicated facilities, PROC0 Other. Environmental release categories [ERC]: ERC11a Widespread use of articles with low release (indoor). Article categories [AC]: AC2 Machinery, mechanical appliances, electrical/electronic articles. Remark: Adsorb's carbon dioxide from the air
What are the hazard statements for Drägersorb 400?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of Drägersorb 400?
The melting point is not determined and the boiling point is The boiling point does not need to be determined because the solid melts above 300 °C..