NextSDS Logo
Safety Data Sheet EN

Clavamox® Drops

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Clavamox® Drops
Synonyms
Clavamox

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Veterinary product used as antibiotic agent

Uses advised against

Not for human use

Manufacturers & Suppliers

Z

Zoetis Inc.

manufacturer

100 Campus Drive, P.O. Box 651, Florham Park, New Jersey 07932 (USA)

1-800-366-5288

Z

Zoetis Belgium S.A.

manufacturer

Mercuriusstraat 20, 1930 Zaventem, Belgium

Emergency Contacts

Rocky Mountain Poison Control Center

1-866-531-8896

CHEMTREC

1-800-424-9300

24 hours

International CHEMTREC

+1-703-527-3887

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P272 Contaminated work clothing should not be allowed out of the workplace
P280 Wear protective gloves/protective clothing/eye protection/face protection
P285 In case of inadequate ventilation wear respiratory protection
P302 + P352 IF ON SKIN: Wash with plenty of soap and water
P304 + P341 IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing
P321 Specific treatment (see supplemental first aid instructions on this label)
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician
P363 Wash contaminated clothing before reuse

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Potassium clavulanate EC: 262-640-9 61177-45-5 11.5% Yes
Amoxicillin trihydrate 61336-70-7 40% Yes
Silicon dioxide, NF EC: 231-545-4 7631-86-9 --- Yes
Non-hazardous ingredients --- --- No

* Proprietary Ingredient(s) indicated as hazardous have been assessed under standards for workplace safety.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and keep patient at rest.

Skin contact

Remove contaminated clothing. Flush area with large amounts of water. Use soap.

Eye contact

Flush with water while holding eyelids open for at least 15 minutes.

Ingestion

Never give anything by mouth to an unconscious person. Wash out mouth with water. Do not induce vomiting unless directed by medical personnel.

Immediate Medical Attention

Seek medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, extinguishing powder, foam, or water.

Specific hazards

Fine particles (such as dust and mists) may fuel fires/explosions.

Firefighter Protection

During all fire fighting activities, wear appropriate protective equipment, including self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Contain the source of spill if it is safe to do so. Report emergency situations immediately.

Large spill

Non-essential personnel should be evacuated from affected area. Report emergency situations immediately. Clean up operations should only be undertaken by trained personnel.

Environmental

Care should be taken to avoid environmental release.

Cleanup methods

Collect spilled material by a method that controls dust generation. A damp cloth or a filtered vacuum should be used to clean spills of dry solids. Clean spill area thoroughly.

Materials: A damp cloth or a filtered vacuum

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Minimize dust generation and accumulation. Avoid breathing dust. Avoid contact with eyes, skin and clothing. When handling, use appropriate personal protective equipment (see Section 8). Wash thoroughly after handling.

Storage

Store as directed by product packaging.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Explosive Limits
---
Dynamic Viscosity
---
Cloud Point
---
Relative Density
---
Appearance
---
Physical State
Powder
Vapor Pressure
---
Voc Content
---
Melting Point
---
Properties Status
---
Decomposition Temperature
---
State Under Standard Conditions
---
Kinematic Viscosity
---
Auto Ignition Temperature
---
Odor Threshold
---
Solidification Point
---
Form
---
Ph
---
Lower Explosive Limit
---
Softening Point
---
Upper Explosive Limit
---
Flash Point
---
Crystallisation Point
---
Colour
Off-white
Evaporation Rate
---
Physical State Data
solid
Odor
---
Freezing Point
---
Flammability
---
Density
---
Solubility In Water
---
Bulk Density
---
Solubility In Fat
---
Metal Corrosion
---
Relative Evaporation Rate
---
Boiling Point
---
Solubility
---
Partition Coefficient
---
Vapor Density
---
Molecular Weight
Mixture
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use.

Reactivity

No data available

Avoid

Fine particles (such as dust and mists) may fuel fires/explosions.

Incompatible

As a precautionary measure, keep away from strong oxidizers

Decomposition

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Amoxicillin trihydrate Daphnia magna (Water Flea) EC50 48 Hours > 2300 mg/L Lepomis macrochirus (Bluegill Sunfish) EC50 96 Hours > 930 mg/L Oncorhynchus mykiss (Rainbow Trout) EC50 96 Hours > 1000 mg/L Microcystis aeruginosa (Blue-green Alga) EC50 48 Hours 0.0037 mg/L Selenastrum capricornutum (Green Alga) NOEC 48 Hours 250 mg/L
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste in accordance with all applicable laws and regulations. Member State specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization be practiced. The best available technology should be utilized to prevent environmental releases. This may include destructive techniques for waste and wastewater.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Clavamox® Drops known by?

Clavamox® Drops is also known as: Clavamox

What is the hazard signal word for Clavamox® Drops?

The signal word is danger.

What is the physical form of Clavamox® Drops?

Clavamox® Drops is a powder with off-white color.

What is Clavamox® Drops used for?

Veterinary product used as antibiotic agent

What are the hazard statements for Clavamox® Drops?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled