Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1)
- Product Code
- LUL5069
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in vitro diagnostic use. Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice.
Manufacturers & Suppliers
Randox Laboratories Ltd.
manufacturer
55 Diamond Road, Crumlin, Co. Antrim, United Kingdom, BT29 4QY
+44 (0) 28 9442 2413
http://www.randox.com
Emergency Contacts
Emergency Contact
+44 (0) 28 9442 2413
GMT, Mon - Fri. 08.40-17.20
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Liquid Chemistry Premium Plus Level 1 | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If breathing becomes difficult, call a physician.
Symptoms: May be irritating to mucous membranes and upper respiratory tract.
In case of skin contact, wash immediately with soap and copious quantities of water.
Symptoms: May cause irritation to skin.
Flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating eyelids with fingers. Call a physician.
Symptoms: May cause irritation to eyes.
If swallowed wash out mouth with water, provided person is conscious. Call a physician.
Immediate Medical Attention
Call a physician if breathing becomes difficult (inhalation), if eye contact occurs, or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for surrounding fire
May emit toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Treat material as you would human body fluids.
None determined
Treat material as you would human body fluids. Alternatively, decontamination using a 0.1% sodium hypochlorite is acceptable. Perform this type of decontamination in a fume hood.
Materials: 0.1% sodium hypochlorite
Related Products
Similar products with comparable safety profiles
LIQUID CHEMISTRY PREMIUM PLUS LEVEL 3 (LIQ CHEM PREMIUM PLUS 3)
---
LIQUID CHEMISTRY CONTROL PREMIUM PLUS - LEVEL 2 (LIQ CHEM PREMIUM PLUS 2)
---
CAUSTIC POTASH LIQUID (ALL GRADES)
UFI: 3U7U-P285-Y00W-TEXS
A1 LP01 Liquid
---
10X EZ PREP SOLUTION, 2L
---
Wise Chem E-115 Part A
---
Wise Chem E-115 Part A
---
Liquichek™ Immunoassay Plus Control, Level 1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment (see section 8.2.2). Wash thoroughly after handling. Do not use if skin is cut or scratched. Avoid contact with eyes, skin and clothing. Do not eat, drink or smoke when using this product.
Store at temperatures and conditions as indicated on the product label.
Wash thoroughly after handling. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Standard laboratory rubber or latex gloves
Protective glasses
Not applicable
Laboratory coat
Not determined
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not determined
Not determined
Not determined
Strong oxidizing agents and acids
Not determined
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1)?
The signal word is no signal word.
What is the physical form of LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1)?
LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1) is a liquid appearing as liquid with straw coloured color.
What is the solubility of LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1)?
Not determined
What is LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1) used for?
For in vitro diagnostic use. Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice.
What is the melting point of LIQUID CHEMISTRY PREMIUM PLUS LEVEL 1 (LIQ CHEM PREMIUM PLUS 1)?
The melting point is Not determined and the boiling point is Not determined.