CLEANING LIQUID, (ESL5)

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Symptoms: Exposure to vapors (mist) will cause respiratory irritation and anesthesia.

Immediately flush with plenty of water while removing contaminated clothing and shoes. Wash contaminated clothing before reuse.

Symptoms: swelling or redness

Immediately flush eyes with plenty of water for several minutes. Hold eyelids open during flushing.

Symptoms: Contact with eye will be irritating.

DO NOT induce vomiting.

Symptoms: May cause injury of mouth, throat, and stomach.

Dry chemical, Foam, Carbon dioxide, Dry sand, Loaded stream in spray.

Water, High-pressure water jet.

hazardous vapors and toxic decomposition products

Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Decontaminate or discard any clothing that may contain chemical residues.

Evacuate personnel, thoroughly ventilate area, use self-contained breathing apparatus and wear appropriate personal protective equipment.

Wipe off spillage. Prevent liquid from entering sewers, waterways or low areas.

Wipe off spillage

Avoid contact with eyes, skin and clothing. Use proper ventilation and no fire in work place. Put protection wear that has electrical conductivity in case of work. Keep out of reach of children and do not drink.

Keep containers tightly closed. Do not store the product in high or freezing temperatures. Keep the product out of direct sunlight.

Keep out of reach of children and do not drink.

no fire in work place

Provide general and/or local exhaust ventilation.

Not required under suitable use as setting the cleaning liquid on the printer. However, in case of direct contact to the cleaning liquid, use protective gloves. Recommended impervious gloves is butyl rubber glove.

Not required under suitable use as setting the cleaning liquid on the printer. However, in case of direct contact to the cleaning liquid, wear safety glasses or chemical splash goggles.

In case ventilation is insufficient, employee must use NIOSH approved air purifying respiratory equipment. Use a half facepiece respirator (with goggles) or full face-piece respirator (without goggles) filtered with organic vapor cartridge. For emergency and other conditions where the exposure guideline may be exceeded, use an approved positive-pressure self-contained breathing apparatus or positive-pressure airline with auxiliary self contained air supply. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.

Not required under suitable use as setting the cleaning liquid on the printer. However, in case of direct contact to the cleaning liquid, wear protective clothing.

Avoid release to the environment.

Stable under normal temperature.

No reactivity under normal temperature.

Not expected.

Elevated temperatures/heat, UV light, when not in use.

Avoid contact with acids, amines, free radical initiators, oxidizing agents.

Carbon monoxide, carbon dioxide, oxides of nitrogen, toxic gases/vapors.

Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial and Local regulations.

Transport and storage of the product in accordance with general precautions and instructions mentioned in this SDS.

Transport and storage of the product in accordance with general precautions and instructions mentioned in this SDS.

Transport and storage of the product in accordance with general precautions and instructions mentioned in this SDS.