BOTTLED & BAG PREPARED MEDIA

Move to fresh air. Get medical attention immediately if symptoms occur.

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.

Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

No information available.

Thermal decomposition can lead to release of irritating gases and vapors.

Ensure adequate ventilation. Use personal protective equipment. Avoid dust formation.

Should not be released into the environment.

Sweep up or vacuum up spillage

Ensure adequate ventilation. Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation. Avoid dust formation.

Keep container tightly closed. Protect from moisture. Keep away from direct sunlight. Keep at temperatures between 2° and 8 °C.

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday.

Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source

Protective gloves. Glove material: Disposable gloves. Breakthrough time: See manufacturers recommendations. Glove thickness: -. EU standard: EN 374. Glove comments: (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

Safety glasses with side-shields (European standard - EN 166)

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: In case of insufficient ventilation wear suitable respiratory equipment. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted

Long sleeved clothing

No information available.

Stable under normal conditions

None known, based on information available

None under normal processing. Hazardous polymerization does not occur.

Excess heat. Avoid dust formation.

Incompatible products

None under normal use conditions.

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.