NextSDS Logo
Safety Data Sheet EN

COLORMATIC PRE-FILL STANDARD 275 ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
COLORMATIC PRE-FILL STANDARD 275 ML
Product Code
570704

Regulatory Identifiers

CAS Number
N/A

Identified Uses

SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Product category: Paint remover, Process category: PROC7 Industrial spraying PROC11 Non industrial spraying, Application of the substance / the mixture: Paint

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

E

European Aerosols B.V.

manufacturer

Wolfraamweg 2 NL-8471 XC Wolvega The Netherlands

+31 (0)561 694400

Emergency Contacts

European Aerosols B.V.

+31 (0)561-694400

09:00h - 17:00h

NPIS National Poisons Information Centre

+44 0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol. Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe spray.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents / container in accordance with regional regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
dimethyl ether EC: 204-065-8 115-10-6 50 - 75% Yes
acetone EC: 200-662-2 67-64-1 25 - 50% Yes
xylene EC: 905-588-0 --- 2.5 - 5% Yes
butan-1-ol EC: 200-751-6 71-36-3 2.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Generally the product does not irritate the skin.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Drink plenty of water and provide fresh air. Call for a doctor immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire extinguishing methods suitable to surrounding conditions.

Specific hazards

During heating or in case of fire poisonous gases are produced.

Firefighter Protection

Mouth respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away. Keep away from ignition sources.

Environmental

Do not allow to enter sewers/ surface or ground water.

Cleanup methods

Dispose contaminated material as waste according to item 13.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation/exhaustion at the workplace.

Storage

Keep container tightly sealed. Observe official regulations on storing packagings with pressurised containers.

Fire prevention

Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not applicable.
Odor
Solvent-like
Vapor Density
---
Dynamic Viscosity
Not determined.
Relative Density
---
Voc Content
---
Molecular Weight
---
Solubility In Water
Not miscible or difficult to mix.
Form
Aerosol
Physical State Data
aerosol
Bulk Density
---
Decomposition Temperature
Not determined.
Melting Point
Undetermined.
Colour Intensity
---
Metal Corrosion
---
Appearance
Aerosol
Colour
Clear
Upper Explosive Limit
26.2 Vol % (115-10-6 dimethyl ether)
State Under Standard Conditions
---
Flammability
---
Ph
Mixture is non-soluble (in water).
Flash Point
Not applicable, as aerosol.
Density
0.7 g/cm³ (5.8 lbs/gal)
Vapor Pressure
4000 hPa (3000.2 mm Hg) (115-10-6 dimethyl ether)
Odor Threshold
Not determined.
Cloud Point
---
Solubility In Fat
---
Physical State
Aerosol
Solidification Point
---
Relative Evaporation Rate
---
Lower Explosive Limit
2.6 Vol % (67-64-1 acetone)
Kinematic Viscosity
Not determined.
Softening Point
---
Crystallisation Point
---
Properties Status
---
Partition Coefficient
Not determined.
Freezing Point
---
Auto Ignition Temperature
240 °C (464 °F) (115-10-6 dimethyl ether)
Explosive Limits
---
Boiling Point
Not applicable, as aerosol.
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
not regulated
ADR

Warning: Gases.

IMDG

Warning: Gases.

IATA

Warning: Gases.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for COLORMATIC PRE-FILL STANDARD 275 ML?

The signal word is danger.

What is the physical form of COLORMATIC PRE-FILL STANDARD 275 ML?

COLORMATIC PRE-FILL STANDARD 275 ML is a aerosol appearing as aerosol with clear color. It has solvent-like odor.

What is COLORMATIC PRE-FILL STANDARD 275 ML used for?

SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Product category: Paint remover, Process category: PROC7 Industrial spraying PROC11 Non industrial spraying, Application of the substance / the mixture: Paint

What are the hazard statements for COLORMATIC PRE-FILL STANDARD 275 ML?

This substance has 3 hazard statements:

  • H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of COLORMATIC PRE-FILL STANDARD 275 ML?

The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..