Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STAPHYTECT PLUS
- Product Code
- DR0850
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic.
Uses advised against
No Information available
Manufacturers & Suppliers
REMEL (EUROPE) LIMITED
manufacturer
Remel House, Clipper Boulevard West, Crossways, Dartford, Kent. DA2 6PT, UK
(+44) 1322 295600
Oxoid Ltd.
distributor
Wade Road, Basingstoke, Hants, UK, RG24 8PW
+44 (0) 1256 841144
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Obtain medical attention. Get medical attention immediately if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ensure adequate ventilation.
Should not be released into the environment.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Staphaurex Plus 450 tests
---
Staph Plus Latex Kit
---
MENNO-HORTISEPTCLEAN PLUS
---
Prolex™ Staph Positive Control Reagent
---
STABROM® 909 Biocide
UFI: D645-H06X-U00F-7MAW
Pastorex Staph-Plus - Negative Control, 1 ml
---
MOLYKOTE® G-N Plus Paste
---
MOLYKOTE[®] Metal Protector Plus
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid ingestion and inhalation. Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Avoid ingestion and inhalation. Avoid contact with skin, eyes and clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Disposable gloves. See manufacturers recommendations. EN 374. (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Safety glasses with side-shields (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation
Long sleeved clothing
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Excess heat.
Acids. copper.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for STAPHYTECT PLUS?
The signal word is no signal word.
What is the physical form of STAPHYTECT PLUS?
STAPHYTECT PLUS is a liquid appearing as blue . It has no information available odor.
What is STAPHYTECT PLUS used for?
In vitro diagnostic.
What is the melting point of STAPHYTECT PLUS?
The melting point is Not applicable and the boiling point is Not applicable.