Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MENNO-HORTISEPTCLEAN PLUS
- Product Form
- liquid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent, liquid, alkaline, Foaming agent
Manufacturers & Suppliers
MENNO CHEMIE-VERTRIEB GMBH
manufacturer
Langer Kamp 104, D-22850 Norderstedt
+49(0)40/5290667-0
www.menno.de
Emergency Contacts
Giftinformationszentrum Nord Universität Göttingen
+49(0)551/ 1 92 40
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide; caustic soda EC: 215-185-5 | 1310-73-2 | 10 - 15% | Yes |
| Sodium-p-cumulenesulphonate EC: 239-854-6 | 15763-76-5 | 1 - 5% | Yes |
| Cocodimethylamineoxide EC: 263-016-9 | 61788-90-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the victim to fresh air. Call a physician if irritation develops or persists.
Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician immediately. If conscious, drink plenty of water. In case of ingestion, the stomach should be emptied by gastric lavage under qualified medical supervision. If a person vomits when lying on his back, place him in the recovery position.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically. If ingested, irrigate the stomach.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
The product is not flammable. Vapours may form explosive mixtures with air.
Keep containers and surroundings cool with water spray. Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Wear full protective clothing and self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid breathing vapours, mist or gas. Avoid contact with skin, eyes and clothing. Use personal protective equipment.
Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. Prevent product from entering drains.
Soak up with inert absorbent material
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in area provided with appropriate exhaust ventilation. Avoid breathing vapours, mist or gas. Keep container tightly closed. Handle and open container with care. Do not spray on a naked flame or any incandescent material.
Keep tightly closed. Provide adequate ventilation. Keep at temperatures below 40 °C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in area provided with appropriate exhaust ventilation. Avoid breathing vapours, mist or gas.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Impervious gloves, Product of: Nitrile rubber. Short term : (CR) Poly-Chloroprene. Unsuitable material : NR (Natural Rubber), PVC (Polyvinylchloride)
Tightly fitting safety goggles.
In case of insufficient ventilation, wear suitable respiratory equipment. No special protective equipment required.
Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
The product is chemically stable.
Exothermic reaction with acids. Peroxides, Oxidizing agents. None reasonably foreseeable.
Strong sunlight for prolonged periods.
Acids. Oxidizing agents. Peroxides. Strong acids and oxidizing agents
None reasonably foreseeable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Shipping Name
- CAUSTIC ALKALI LIQUID, N.O.S. (Sodium hydroxide solution, )
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MENNO-HORTISEPTCLEAN PLUS?
The signal word is danger.
What is the physical form of MENNO-HORTISEPTCLEAN PLUS?
MENNO-HORTISEPTCLEAN PLUS is a liquid with red color. It has mild odor.
What is MENNO-HORTISEPTCLEAN PLUS used for?
Cleaning agent, liquid, alkaline, Foaming agent
What are the hazard statements for MENNO-HORTISEPTCLEAN PLUS?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of MENNO-HORTISEPTCLEAN PLUS?
The melting point is not determined and the boiling point is not determined.