Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Salmonella O Polyvalent (Groups A to S) Agglutinating Sera
- Product Code
- R30858201
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
REMEL (EUROPE) LIMITED
manufacturer
Remel House, Clipper Boulevard West, Crossways, Dartford, Kent. DA2 6PT, UK
(+44) 1322 295600
Oxoid Ltd.
distributor
Wade Road, Basingstoke, Hants, UK, RG24 8PW
+44 (0) 1256 841144
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol EC: 203-632-7 | 108-95-2 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with warm water and soap.
Rinse thoroughly with plenty of water, also under the eyelids.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention if symptoms occur (Eye Contact/Inhalation). Obtain medical attention if irritation persists (Skin Contact). Obtain medical attention (Ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the skin and the eyes. Use personal protective equipment. Ensure adequate ventilation.
Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Salmonella O Factor 8 (Group C2) Agglutinating Sera
---
Salmonella O Factor 9 Group D Agglutinating Sera
---
Salmonella O Factor 6,7 (Group C1) Agglutinating Sera
---
Salmonella O Factor 4 (Group B) Agglutinating Sera
---
Salmonella Latex Test
---
STREPTOCOCCAL GROUPING KIT
---
Polyclonal Rabbit Antibody Solution
---
A - Latex anti-Streptococcus group A, 1 ml
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Keep at temperatures between 2° and 8 °C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Disposable gloves. Breakthrough time: See manufacturers recommendations. Glove thickness: -. EU standard: EN 374 (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Safety glasses with side-shields (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation
Long sleeved clothing
Prevent product from entering drains. Do not allow material to contaminate ground water system. Local authorities should be advised if significant spillages cannot be contained.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions
None known, based on information available
Hazardous polymerization does not occur. None under normal processing.
None known.
None known.
Carbon oxides. Nitrogen oxides (NOx). Hydrogen bromide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Salmonella O Polyvalent (Groups A to S) Agglutinating Sera?
The signal word is no signal word.
What is the physical form of Salmonella O Polyvalent (Groups A to S) Agglutinating Sera?
Salmonella O Polyvalent (Groups A to S) Agglutinating Sera is a liquid appearing as amber . It has no information available odor.
What is Salmonella O Polyvalent (Groups A to S) Agglutinating Sera used for?
Laboratory chemicals.
What is the melting point of Salmonella O Polyvalent (Groups A to S) Agglutinating Sera?
The melting point is No data available and the boiling point is Not applicable.